View Single Post
  #4   Report Post  
Posted to alt.home.repair
CJT CJT is offline
external usenet poster
 
Posts: 1,155
Default Radiant barrier questions

Joseph Meehan wrote:



wrote in message
...

On Mar 30, 6:19 am, "Bob" wrote:

I have a couple questions for the experts on radiant barriers.

1. Are they worth the expense in reducing utility bills in a hot
climate?



I've never seen hard, actual data that proves they are, but the
consensus does appear to be that they work and are worth the cost.
The material is maybe $100-200 for a typical attic, which you should
recover relatively quickly if you use AC in an area that gets
reasonably hot.



2. Is there a preference between the paint and a physical barrier
stapled to the rafters.



I've only seen either the stapled type or else the similar type that
is already applied to sheathing. Never knew paint type existed. If
you have 2 people, IMO, it's going to be a lot easier, cleaner, faster
to staple.



It seems that using a physical barrier on the rafters would block
air flow.



You leave an open area of a foot or so at the bottom and the top.
This leaves plenty of space for air to enter at the bottom and exit at
the top, preferably through a ridge vent. If you don't have a ridge
vent, then I would think it could impact air flow through a gable
vent, etc.




Suggestions please. Thanks in advance.

Bob-tx





I agree with trader and suspect that the physical barriers would work
better since they would create a separate air space as well and that
would increase the insulation. Remember you want to keep the shinny
side clean.


You want to keep one side that adjoins free air clean. I don't think
it really matters whether it's the shiny side or not.

--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .