View Single Post
  #5   Report Post  
Posted to alt.home.repair
MRS. CLEAN MRS. CLEAN is offline
external usenet poster
 
Posts: 164
Default TIME TO SNAKE OUT THE PLUMBING

On Mar 17, 6:25*pm, jim wrote:
On Mar 17, 6:23*pm, "MRS.CLEAN" wrote:





On Mar 17, 3:35*pm, The Reverend Natural Light


wrote:
On Mar 17, 1:50 pm, "MRS.CLEAN" wrote:


Can anyone tell me what tool is used to open thecleanout valve?


Why can't it be tool-less to get in?


The couple of times I've done that, I just remove the toilet in the
basement bathroom and go out that way. *Trying to crack open the cap
on a 40 year old main cleanout seems like a bad idea. *And, I think
it's easier to work with the opening at floor level than chin level -
where most cleanouts seem to be for some reason. *Replacing the toilet
only takes a couple of minutes. *Depends on the layout whether that's
a good idea or not.


Any tips on snaking it out?


Fill the line with hot water. *Might help soften whatever is stuck in
there and you get visual feedback when you've cleared the
obstruction. *But don't stop there. *Keep going as far as you can or
are comfortable with before declaring it fixed.


Any snake recommendation? *I have a short line (20 feet at most).


I've used 3 different types. *Home Repo rents a snake for 4" line for
about $70 a day. *It worked great. *Years later I rented one from the
local tool place that was just too big and too hard to use. *The snake
came in 10' sections and had to be assembled one at a time. *All I
managed to do was push the plug farther down the pipe and is was
backed up again the next day. *So I sent the S.O. to a different
rental place the next afternoon and when I got home a much smaller
version of the H.D. style snake was waiting. *It was for 3" or maybe
even 2" but it worked surprisingly well. *What it lacked in size and
power it made up for by being very easy to use. *It took a long time
to get the line cleared.


Thanks for the info.


Thecleanout valve is ground level in backyard and there's no second
toilet. *I will try going thru the throne * I just don't want the
porcelin scratched...- Hide quoted text -


- Show quoted text -


Trust me don't go thru the throne. Use thecleanout on the line going
out to the street that is what it is for . Also if you have gunk it is
not running fast enough .- Hide quoted text -

- Show quoted text -


Yes, it's an older house and the plumbing is running slow. I plunged
and snaked and found no blockage at the toilet.

The line is 20 feet. Picture a straight line to the clean out vavle
in back yard, right to left. At the right is the clean out vavle. 12
feet left is the tub, 3 feet is the kitchen bath sinks back to back,
and 3 feet more is the toilet. It's very simple.

I ran water in the kitchen sink, bath tub and flush the toilet for 2
hours to no avail. I can try the throne. If that doesn't work, I can
buy the tool to open the clean out valve, I guess.

Will running copious amounts of water do anything?