On Mon, 17 Mar 2008 18:57:45 -0400, mm
wrote:
And, related to the existing screws in the photo, just snip them off
with diagonal cutters.
You can really cut through screws with wire cutters?? Or what do you
mean by diagonal cutters, that can cut though screws?
Hey!
http://www.matcotools.com/ProductImages/spdc3.jpg
Not the best for cutting /breaking a screw, but I've gotten by
My read on the OP was the screws were from the top and then tiled
over... cutting the screw is less damage.