Doc wrote:

I've got this wok from WalMart that's coated with Xylan, which I
gather is a first cousin of Teflon. Big mistake. It's non-stick
properties aren't very good.

I don't like the idea of simply throwing it out and dumping more money
into a non-coated wok. I'm sure I could strip the coating off with one
of these fibrous abrasive wheels that you bolt onto a hand drill -
wearing a dust mask of course - but is the surface that's exposed
going to be suitable for cooking? Wondering if there's some pre-
treating that's done to the metal that might render it toxic if used
as a cooking surface.

Further, should it be possible to thoroughly remove all the coating
abrasively like that? Obviously I don't want to leave behind small
particles since I assume it's toxic.


Thanks

It wasn't from walmart, but I did exactly this to a large wok
that I just didn't want to throw away. I used a wire wheel on a
side grinder to remove the teflon, then sanded it lightly with
emory cloth to remove the rest and smooth everything out. I have
been using it for about 5 years like that.

The problem is that the metal is very prone to rusting, so I have
to oil it after every cleaning, and temper it like a cast iron
pan. Since I mostly use it on a fish fryer grill (although I
will use it on the stove), it has held up pretty well. It ain't
pretty by any means, but useful.

--
Robert Allison
Rimshot, Inc.
Georgetown, TX