On Sun, 2 Mar 2008 11:35:57 -0800 (PST), snowburnt
wrote:

I was replacing some receptacles in my kitchen (20 Amp circuit). I
pulled out the existing receptacles and found that they had 7 wires
going into them, 3 white 3 black and 1 ground. the receptacle had 2
screw terminals per side, and the extra 2 wires were in the back,
pushed in.

I was going to try to duplicate this but the new receptacles only
accept 14 gauge in the back and the old ones accept 12 or 14...the
wires seem to be 12. so I can't duplicate with these decor plugs.

should I try to find receptacles with the 12 cu wires or could I put
two wires per screw, or connect two of them with a connector?

thanks

That doesn't help you any, but any kitchen that has more than 2 cables
per receptacle sounds wrong.

IMO, each kitchen outlet should be on a separate circuit by itself.