Leaky valve problem
In article ,
Bob Engelhardt wrote:
nick hull wrote:
Bob Engelhardt wrote:
You could put a cap on the output pipe. ...
I'll probably do that in any case.
Well, that's all you'll need - it's only holding 2 1/2 psi (when the
leak has filled behind it) and the valve will hold back all but the leak
when you take the cap off.
The cap will cost $44 (2,5" firehose)
I know that you have a lathe! BG
Yes but the firehose thread is 7 tpi, not listed on my change gear
charts ;(
Free men own guns - www(dot)geocities(dot)com/CapitolHill/5357/
|