View Single Post
  #9   Report Post  
Whunicut
 
Posts: n/a
Default 6 volt Hobbs meter

For the amount of current you are talking about, put a 6.2 volt Zener
diode with the requisite power rating (probably written on the meter, if
not you will have to measure the current draw) in series with the meter.

Kevin Gallimore


Not on the meter or in the literature is there anything about the power rating.
Other than 6 volts.
If the meter spikes every 3 minutes or so, how can I measure the spike? Or do I
have to?

Thanks,
Warren