John Greenwood wrote:
I don't know the correct way to seal a worktop to the wall but I was going
to seal it to the wall with transparent silicone before tiling. After tiling
should I then run a bead of silicone along the tile/worktop edge or will the
grout be sufficient considering I have already sealed the worktop behind the
tiles.
Depends a bit on just how big the gaps are!
Normally you could tile and then run a bead of silicone sealant along
the tile / worktop joint. If your gaps are so big as to be bigger than
the thickness of a the tiles (i.e. you wouls still have a vertical gap
at this point) then you have a bit more of a problem.
Perhaps one of the worktop sealing strips would do the trick. Fix in
place as directed and then ensure that is well sealed in with silicone
top and bottom.
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/