Moving center drilled hole
On Sep 10, 3:43 am, Nick Mueller wrote:
Phil Kangas wrote:
How would you go about 'moving' the hole
back to center?
Make a kerf with a cold chisel (in the cone) and drill a bit deeper. It will
move in the direction of the kerf.
Nick
--
The lowcost-DRO:
http://www.yadro.de
The type of cold chisel to use is called a Half Round Nose and it cuts
a semicircular groove. You can grind a pin punch or nail set on an
angle to make a quick one. Sorry, couldn't find a good picture.
jw
|