Thread
:
Kenmore dryer's drum won't rotate
View Single Post
#
8
Posted to alt.home.repair
[email protected]
external usenet poster
Posts: 24
Kenmore dryer's drum won't rotate
wrote:
wrote:
On my Kenmore, after you remove the lint assembly the top swings up.
Two clips hold the back of the top on, just remove then and swing the
top out of the way. I think I removed the top completely. I then
beleive I removed the thin belt which helped to remove the drum. I
don't remember what else was holding the drum in. But once the drum
was out the rollers were right there and came out without any problem.
Sorry, it was awhile ago when I did this, but if you continue to have a
problem I'll go down and take the cover off of mine.
OK - got it. It turns out that the console needs to be removed first,
because it hides 3 screws that hold the top to the frame at the back.
Once these 3 screws were removed, I had no problem sliding the top
towards the front and take the top out completely. I think I passed the
only serious hurdle here (tricky).
Thank you so much. I truly appreciate your help.
Sam
So, how did you make out? All apart, repaired, and put back together?
-paul
Reply With Quote
[email protected]
View Public Profile
Find all posts by
[email protected]