View Single Post
  #2   Report Post  
Posted to uk.d-i-y
Bob Eager Bob Eager is offline
external usenet poster
 
Posts: 3,348
Default hotpoint washing machine: how do I remove front panel?

On Sat, 22 Jul 2006 22:24:00 UTC, "tubbs"
wrote:

I have a Hotpoint 9536 which I bought in 1994.
Does anyone know how to remove the front panel - with the door in it.


Take the top off (two screws at back, then slide, can't remember if it's
forward or backwards).

Remove soap tray (pulls straight out but can be a struggle) and remove
four screws beneath on plastic fascia. Loosend screw hold on control
knob (convenient hole in top edge). Remove fascia taking care with
plastic clips that hold indicator neons.

Remove screws at top and bottom of front panel. It will now pull away
but won't go far until you remove the wire ring that holds the door
seal. To do that, open door and prise the plastic clip towards you (it
fits over a pin). It will come in two and release the wire. WARNING:
this wire fitting seems to vary so try to check before applying force!


--
The information contained in this post is copyright the
poster, and specifically may not be published in, or used by
Avenue Supplies, http://avenuesupplies.co.uk