A DIY & home improvement forum. DIYbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » DIYbanter forum » Do - it - Yourself » Woodworking
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Refinishing a solid oak pedestal table.



 
 
LinkBack Thread Tools Display Modes
  #1  
Old March 15th 05, 03:25 AM
[email protected]
external usenet poster
 
Posts: n/a
Default Refinishing a solid oak pedestal table.

Advice please ,in LAYMENS terms ! I would like to paint a solid oak
table, which has a polyeurethene finish, in a WHITE SATIN FINISH. I
have been told that a lacquer paint gives a durable finish? This will
be a breakfast room table. I am happy to sand this down so it will be
ready to finish but not sure what the best paint to use? I do have a
Wagner 120 sprayer but have no idea which way to go from there. Latex,
Enamel or Lacquer? Do I need to cover it with something like Kilz
first, can I use that in a sprayer? Or do I just need some sort of a
sealer before doing the paint? HELP, all you experts out there!

Ads
  #2  
Old March 15th 05, 03:50 PM
Larry Jaques
external usenet poster
 
Posts: n/a
Default

On 14 Mar 2005 18:25:02 -0800, the inscrutable
" spake:

Advice please ,in LAYMENS terms ! I would like to paint a solid oak
table, which has a polyeurethene finish, in a WHITE SATIN FINISH. I


You have a LOT of work ahead of you. To get a paint to stick to it,
you'll have to strip the table down to bare wood. (even poly doesn't
stick that well to poly) Doing that with polyurinestain is a real
chore. Do it outside with old clothes, THICK nitrile gloves (it'll eat
latex), and a carbon filter/organic canister respirator on. Use an
aircraft-type stripper, one with methylene chloride in it. Make sure
to keep it off your skin, it burns intensely. DAMHIKT. If the table
has a veneer layer on top, you may lose it.


have been told that a lacquer paint gives a durable finish? This will
be a breakfast room table. I am happy to sand this down so it will be
ready to finish but not sure what the best paint to use? I do have a
Wagner 120 sprayer but have no idea which way to go from there. Latex,
Enamel or Lacquer? Do I need to cover it with something like Kilz
first, can I use that in a sprayer? Or do I just need some sort of a
sealer before doing the paint? HELP, all you experts out there!


Yes, use the proper sealer for the type of paint you buy. Ask your
local paint store manager what they'd use, or get quotes from
furniture refinishing shops in the area, asking what they'd use and
why. Lacquer and enamel are gloss paints by nature, so you'd have to
degloss them for a satin finish. After you've sprayed the table, take
a week away from it, at least. Let the stuff harden and cure. Do NOT
let your wife talk you into putting it back in service any sooner or
you'll both regret it, with you taking the blame. I've seen that
happen dozens of times. Look at the cure times for the paint you use
and add at least a week to that for a table. Don't touch it or set
anything on it for that time.

Or take it to a refinisher and let them deal with it all. It may be
the best bet for you. G'luck!


--
I speak 2 languages fluently: English and foul.
---------------------------
http://diversify.com Mostly cuss-free Websites
  #3  
Old March 15th 05, 05:11 PM
nospambob
external usenet poster
 
Posts: n/a
Default

Another resource is www.refinishwizard.com forum.

On 14 Mar 2005 18:25:02 -0800, "
wrote:

Advice please ,in LAYMENS terms ! I would like to paint a solid oak
table, which has a polyeurethene finish, in a WHITE SATIN FINISH. I
have been told that a lacquer paint gives a durable finish? This will
be a breakfast room table. I am happy to sand this down so it will be
ready to finish but not sure what the best paint to use? I do have a
Wagner 120 sprayer but have no idea which way to go from there. Latex,
Enamel or Lacquer? Do I need to cover it with something like Kilz
first, can I use that in a sprayer? Or do I just need some sort of a
sealer before doing the paint? HELP, all you experts out there!


  #4  
Old March 16th 05, 04:42 PM
[email protected]
external usenet poster
 
Posts: n/a
Default

Sanding is going well so probably will not have to use the stripper and
it is a solid oak table.
What about the other option of using a latex paint and finishing with a
satin polyeurothene? I guess I am looking for advice on the finish
that will stand up to everyday abuse best since WHITE is NOT a very
practical color for a breakfast table, but got to please the wife!!
Thanks for the help

  #5  
Old March 18th 05, 03:53 AM
Baron
external usenet poster
 
Posts: n/a
Default

If this table was commercially made, it is highly unlikely to have a
polyurethane finish, which may actually be a good thing for you.

Either way, start by preparing the surface. Clean it really well using
something like a capful of Dawn in a gallon of warm, not hot, water and lots
of clean cloths. Rinse with fresh water and dry immediately with clean
cloths. Clean it again with paint thinner, mineral spirits, or naphta.
Again, use lots of clean cloths. Carefully sand any severe roughness down
and then go over the whole surface with some fine sandpaper to just barely
provide the next coating with a slightly roughend surface. Prime and seal
the surface with BIN. This is a white pigmented shellac. It will stick
quite well. As for a topcoat, pigmented lacquer is the best followed by
acrylic latex or oil. The acrylic latexes of today are rivaling the oils.
There are obvious advantages of waterborne finishes over oils. Do NOT use a
vinyl latex as these will be too soft for a table top.

Good Luck.

wrote in message
ups.com...
Advice please ,in LAYMENS terms ! I would like to paint a solid oak
table, which has a polyeurethene finish, in a WHITE SATIN FINISH. I
have been told that a lacquer paint gives a durable finish? This will
be a breakfast room table. I am happy to sand this down so it will be
ready to finish but not sure what the best paint to use? I do have a
Wagner 120 sprayer but have no idea which way to go from there. Latex,
Enamel or Lacquer? Do I need to cover it with something like Kilz
first, can I use that in a sprayer? Or do I just need some sort of a
sealer before doing the paint? HELP, all you experts out there!



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ping Pong Table [email protected] Woodworking 8 September 24th 04 10:26 PM
I have limited space, need a table that will accomodate different tools that I can adjust to the height of my workbench Eugene Woodworking 9 August 13th 04 08:32 AM
An Ultimate Router Table - Part I: A Short Story Unisaw A100 Woodworking 15 August 4th 04 11:43 PM
Table saw reviews?? John Pilhoefer Woodworking 35 May 30th 04 01:55 AM
Jet table saw table out of tolerance Bob Davis Woodworking 3 October 21st 03 06:54 PM


All times are GMT +1. The time now is 01:54 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.SEO by vBSEO ©2010, Crawlability, Inc.
Copyright 2004-2014 DIYbanter.
The comments are property of their posters.