Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
TS blade problem
I have a Delta hybrid TS and recently discovered I can't fully lower the
blade. At the lowest point, it's about 1/8 of an inch above the insert. I removed the blade but couldn't find anything blocking downward movement. Any ideas? |
#2
Posted to rec.woodworking
|
|||
|
|||
TS blade problem
" wrote in message ... I have a Delta hybrid TS and recently discovered I can't fully lower the blade. At the lowest point, it's about 1/8 of an inch above the insert. I removed the blade but couldn't find anything blocking downward movement. Any ideas? Are you related to Dave? You might want to review his post on 7/10, Unisaw, new style, right tilt blade has no lower or upper elecation stops. Won't lower binds at top. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tablesaw blade question/problem | Woodworking | |||
Mower blade problem | Home Repair | |||
Jet TS arbor problem/blade cupping | Woodworking | |||
Powermatic 66 Blade Change Problem | Woodworking | |||
Blade burning problem | Woodworking |