A DIY & home improvement forum. DIYbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » DIYbanter forum » Do - it - Yourself » Woodworking
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

FS: Williams and Hussey Molder Planer



 
 
LinkBack Thread Tools Display Modes
  #1  
Old November 25th 03, 04:47 PM
Tom Watson
external usenet poster
 
Posts: n/a
Default FS: Williams and Hussey Molder Planer

W7S

2hp Baldor Motor.
Switch.
HTC Stand.
Original Unused Planer Knives
Elliptical Jig.

Schmidt Knives

WHM75 (Bed).
WHWM49 (3-1/2 Crown).
WHDY47 (4-1/2 Crown.
WHDY45 (5-1/2 Crown).
CBBR401 (3-1/4 Casing).
W16722 (4-1/2 Casing).
WHWM163 (Base Cap).
WHWM133 (Astragal).
WHBN100oop (1/4 Bead).
WHBN101opp (3/8 Bead).
WHBN102opp (1/2 Bead).
WHP115 (Bead Board).
WHA101 (Relief Cutter).
WHA38L (Crown Back Cutter).
WHA52R (Crown Back Cutter).

Total $3000.00 (Does not include shipping.

610-940-0546



Ads
  #2  
Old November 25th 03, 07:10 PM
George M. Kazaka
external usenet poster
 
Posts: n/a
Default Williams and Hussey Molder Planer

Tom I have contiplated that machine for years
But have never got around to buyinmg one,
No I'm not interested, just curious as to why you are selling it.

George
"Tom Watson" wrote in message
s.com...
W7S

2hp Baldor Motor.
Switch.
HTC Stand.
Original Unused Planer Knives
Elliptical Jig.

Schmidt Knives

WHM75 (Bed).
WHWM49 (3-1/2 Crown).
WHDY47 (4-1/2 Crown.
WHDY45 (5-1/2 Crown).
CBBR401 (3-1/4 Casing).
W16722 (4-1/2 Casing).
WHWM163 (Base Cap).
WHWM133 (Astragal).
WHBN100oop (1/4 Bead).
WHBN101opp (3/8 Bead).
WHBN102opp (1/2 Bead).
WHP115 (Bead Board).
WHA101 (Relief Cutter).
WHA38L (Crown Back Cutter).
WHA52R (Crown Back Cutter).

Total $3000.00 (Does not include shipping.

610-940-0546





  #3  
Old November 25th 03, 07:13 PM
Tom Watson
external usenet poster
 
Posts: n/a
Default Williams and Hussey Molder Planer

On Tue, 25 Nov 2003 11:10:42 -0700, "George M. Kazaka"
wrote:

Tom I have contiplated that machine for years
But have never got around to buyinmg one,
No I'm not interested, just curious as to why you are selling it.


I've been moving from architectural woodworking towards furniture
making and, while the WH is a fantastic machine, I can't afford to
keep it around as sculpture.

I figured I'd put this equipment up on the NG first, before listing it
with my suppliers. Once this stuff gets on their list is won't last a
week.


Regards, Tom
Thomas J. Watson-Cabinetmaker
Gulph Mills, Pennsylvania
http://users.snip.net/~tjwatson
  #4  
Old November 25th 03, 08:43 PM
George M. Kazaka
external usenet poster
 
Posts: n/a
Default Williams and Hussey Molder Planer

I do both and as i have been getting older, SHHHHH don't tell anyone I also
have been leaning more to furniture, but that would be no reason to get rid
of the machine, just some of the knives you have

Even with my shaper i never buy ready made knives of standard shapes, I have
always designed my own and had them ground I still get them not far from
you, a company called CAYCE just outside of baltimore cost for 5/16"
corrugated back knives are 20.00 per inch.

I have some light blades that i grind myself for short runs,
I use only one knife in the head and a almost balancer in the other slot.

The only thing I do not like about the W&H and a lot of other standard knife
machines is the limit on the depth of cut,
I tend to like a moulding to stand out as a moulding not a few scratches on
the wood.

Later,
George
"Tom Watson" wrote in message
s.com...
On Tue, 25 Nov 2003 11:10:42 -0700, "George M. Kazaka"
wrote:

Tom I have contiplated that machine for years
But have never got around to buyinmg one,
No I'm not interested, just curious as to why you are selling it.


I've been moving from architectural woodworking towards furniture
making and, while the WH is a fantastic machine, I can't afford to
keep it around as sculpture.

I figured I'd put this equipment up on the NG first, before listing it
with my suppliers. Once this stuff gets on their list is won't last a
week.


Regards, Tom
Thomas J. Watson-Cabinetmaker
Gulph Mills, Pennsylvania
http://users.snip.net/~tjwatson



  #5  
Old November 25th 03, 09:03 PM
Tom Watson
external usenet poster
 
Posts: n/a
Default Williams and Hussey Molder Planer

On Tue, 25 Nov 2003 12:43:16 -0700, "George M. Kazaka"
wrote:

I do both and as i have been getting older, SHHHHH don't tell anyone I also
have been leaning more to furniture, but that would be no reason to get rid
of the machine, just some of the knives you have


The molder was purchased to do the larger work that my shaper couldn't
do. Crown moldings, radiused and elliptical casings, etc.

All of the work that I will be doing in the future is within the
abilities of the shaper that I have, and some molding planes that I've
been aquiring.

Even with my shaper i never buy ready made knives of standard shapes, I have
always designed my own and had them ground I still get them not far from
you, a company called CAYCE just outside of baltimore cost for 5/16"
corrugated back knives are 20.00 per inch.

I have some light blades that i grind myself for short runs,
I use only one knife in the head and a almost balancer in the other slot.

The only thing I do not like about the W&H and a lot of other standard knife
machines is the limit on the depth of cut,
I tend to like a moulding to stand out as a moulding not a few scratches on
the wood.


You might want to check out the profile selection from someone like
Schmidt, for the WH Molder. I've a couple of casing knives meant for
5/4 stock that are pretty high relief.



  #6  
Old December 1st 03, 04:24 PM
Mike
external usenet poster
 
Posts: n/a
Default Williams and Hussey Molder Planer

Can I ask why you are selling it?



"Tom Watson" wrote in message
s.com...
W7S

2hp Baldor Motor.
Switch.
HTC Stand.
Original Unused Planer Knives
Elliptical Jig.

Schmidt Knives

WHM75 (Bed).
WHWM49 (3-1/2 Crown).
WHDY47 (4-1/2 Crown.
WHDY45 (5-1/2 Crown).
CBBR401 (3-1/4 Casing).
W16722 (4-1/2 Casing).
WHWM163 (Base Cap).
WHWM133 (Astragal).
WHBN100oop (1/4 Bead).
WHBN101opp (3/8 Bead).
WHBN102opp (1/2 Bead).
WHP115 (Bead Board).
WHA101 (Relief Cutter).
WHA38L (Crown Back Cutter).
WHA52R (Crown Back Cutter).

Total $3000.00 (Does not include shipping.

610-940-0546





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT +1. The time now is 03:20 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.SEO by vBSEO ©2010, Crawlability, Inc.
Copyright 2004-2014 DIYbanter.
The comments are property of their posters.