Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
scott Doyland
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever

Hi,

Firstly let me say I know nothing about woodwork so will value any
advice you can give me, which may well be to learn something about
woodwork ;-)

In my garden I have a tree stump from a connifer tree that was cutdown
before I moved in, so at least over 2 years ago. Its started to grow
white hard/spongy fungus out of it.

Ive now been given a tree slice about 8 inches thick (dont know what
tree it came from). The person who gave it to me said it had been
laying outside for one year in the rain and sun. It seems to look OK,
some bark is coming off and its not sawn very smooth.

I want to cut the stump so its level, thereby removing the fungus as
well, and then put the tree slice on top like a table. and screw it on.

What do I need to do - I had a quick look in the newsgroup and it said
about drying slices out for years which to be honest I dont want to do.
Id like a 'nice' table for the summer.

1. But do I need to dry it out and if so how and for how long
2. Do I need to put some preservative or wax or something on the slice
and on top of the stump - what do I need to put on it?
3. I want to sand it down to make it a bit smoother, should I let it
dry first or sand it first.
4. should I put anything on the bark of the stump - its coming off a
bit.
5. Should I remove the bark from the slice or leave it on - can I put
prevervative over the bark

As you can see I havent got a clue. What Id like is just to sand it,
stick preservative on it and screw it on the stump. Im not after a
work of art as Id like it to have some 'character' and if it looks
rubbish after a few years I'll probably just remove it.

Thanks very much for any advice.

Regards,
Scott

  #2   Report Post  
Posted to rec.woodworking
tom
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever

I'd do just as you've proposed, Scott. Forget about numbers 1, 2, 4 and
5, but number 3 can help make for a decent place to set your beer.
It'll keep moving, checking and splitting, but as you've noted, that
can be considered "character". So get the stump reasonably flat, the
slice reasonably smooth, and bury a few screws through it into the
stump. Cheers! Tom

  #3   Report Post  
Posted to rec.woodworking
Chip Chester
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever

I agree with Tom.
It would probably be best to finish both sides of the "tabletop" the same.
If you finish just the top, it will absorb water unevenly and warp out of
shape sooner... You might want to treat the stump with something
(bleach?) to slow down the fungus growth after you clean it up.

"Chip"

"scott Doyland" wrote in message
ps.com...
Hi,

Firstly let me say I know nothing about woodwork so will value any
advice you can give me, which may well be to learn something about
woodwork ;-)

In my garden I have a tree stump from a connifer tree that was cutdown
before I moved in, so at least over 2 years ago. Its started to grow
white hard/spongy fungus out of it.

Ive now been given a tree slice about 8 inches thick (dont know what
tree it came from). The person who gave it to me said it had been
laying outside for one year in the rain and sun. It seems to look OK,
some bark is coming off and its not sawn very smooth.

I want to cut the stump so its level, thereby removing the fungus as
well, and then put the tree slice on top like a table. and screw it on.

What do I need to do - I had a quick look in the newsgroup and it said
about drying slices out for years which to be honest I dont want to do.
Id like a 'nice' table for the summer.

1. But do I need to dry it out and if so how and for how long
2. Do I need to put some preservative or wax or something on the slice
and on top of the stump - what do I need to put on it?
3. I want to sand it down to make it a bit smoother, should I let it
dry first or sand it first.
4. should I put anything on the bark of the stump - its coming off a
bit.
5. Should I remove the bark from the slice or leave it on - can I put
prevervative over the bark

As you can see I havent got a clue. What Id like is just to sand it,
stick preservative on it and screw it on the stump. Im not after a
work of art as Id like it to have some 'character' and if it looks
rubbish after a few years I'll probably just remove it.

Thanks very much for any advice.

Regards,
Scott



  #4   Report Post  
Posted to rec.woodworking
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever


Chip Chester wrote:
I agree with Tom.
It would probably be best to finish both sides of the "tabletop" the same.
If you finish just the top, it will absorb water unevenly and warp out of
shape sooner... You might want to treat the stump with something
(bleach?) to slow down the fungus growth after you clean it up.


The part of the fungus that you see is usually only a small part of
the entire organism. Most likely the stump has fungus inside
of it all the way down into the roots.

Not a big deal so long as you do not expect the table to outlive you.

There are epoxies sold that are supposed to penetrate and toughen
rotten wood. I've never tried any so don't know how well the
work but it might be worthwhile to look into using something
like that (and definately a fungicide of some sort) to treat the
stump before you put the table top on it.

The table top will probably rot first where it is in contact with the
stump since the air will be free to circulate around and dry out
the rest.

--

FF

  #5   Report Post  
Posted to rec.woodworking
Wilson
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever

Use four 1/2" lag bolts long enough to go several inches into the stump.
Soak the top of stump with wood preservative.
Use 3/4 short pipe nipples and big washers to make spacers to hold the top
off the stump.
Soak both sides of the top with preservative...copper naphthanate 19% if you
can find it.
Cover the top with sheet metal or some old plexiglass when not in use and it
should last quite a while.
Otherwise, really soak it with an oil/silicone stain. If you can get it to
the point where water beads up on it, it may last quite a while.
If you can get access to a banding tool, three or four bands around the top
would help stabilize it, but you may need new bands now and then as it
dries. I've never done this, but many things made from large sections of
wood are banded...like waterwheel shafts.
Wilson
"scott Doyland" wrote in message
ps.com...
Hi,

Firstly let me say I know nothing about woodwork so will value any
advice you can give me, which may well be to learn something about
woodwork ;-)

In my garden I have a tree stump from a connifer tree that was cutdown
before I moved in, so at least over 2 years ago. Its started to grow
white hard/spongy fungus out of it.

Ive now been given a tree slice about 8 inches thick (dont know what
tree it came from). The person who gave it to me said it had been
laying outside for one year in the rain and sun. It seems to look OK,
some bark is coming off and its not sawn very smooth.

I want to cut the stump so its level, thereby removing the fungus as
well, and then put the tree slice on top like a table. and screw it on.

What do I need to do - I had a quick look in the newsgroup and it said
about drying slices out for years which to be honest I dont want to do.
Id like a 'nice' table for the summer.

1. But do I need to dry it out and if so how and for how long
2. Do I need to put some preservative or wax or something on the slice
and on top of the stump - what do I need to put on it?
3. I want to sand it down to make it a bit smoother, should I let it
dry first or sand it first.
4. should I put anything on the bark of the stump - its coming off a
bit.
5. Should I remove the bark from the slice or leave it on - can I put
prevervative over the bark

As you can see I havent got a clue. What Id like is just to sand it,
stick preservative on it and screw it on the stump. Im not after a
work of art as Id like it to have some 'character' and if it looks
rubbish after a few years I'll probably just remove it.

Thanks very much for any advice.

Regards,
Scott





  #6   Report Post  
Posted to rec.woodworking
scott Doyland
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever


Wilson wrote:
Use four 1/2" lag bolts long enough to go several inches into the stump.
Soak the top of stump with wood preservative.
Use 3/4 short pipe nipples and big washers to make spacers to hold the top
off the stump.
Soak both sides of the top with preservative...copper naphthanate 19% if you
can find it.
Cover the top with sheet metal or some old plexiglass when not in use and it
should last quite a while.
Otherwise, really soak it with an oil/silicone stain. If you can get it to
the point where water beads up on it, it may last quite a while.
If you can get access to a banding tool, three or four bands around the top
would help stabilize it, but you may need new bands now and then as it
dries. I've never done this, but many things made from large sections of
wood are banded...like waterwheel shafts.
Wilson
"scott Doyland" wrote in message
ps.com...
Hi,



Thanks everyone for the help. One more question. Wilson - in your
posting you said to use preservative OR an olil/silcon stain. Is
there any benefit in using one more than the other, does the oll stain
pull out the water as you said if I can get water to bead up on it it
would last longer. Or should I be putting both on.

I think I may well get the slice sawn a bit neater first as by the
sounds of it I could end up with something that looks quite good,
rather then a bodge job as it started off as.

I wonder if a timber yard can cut it neatly for me or if the only way
is to try and chaionsaw off some of the excess lumps and bumps.

Scott

  #7   Report Post  
Posted to rec.woodworking
Bugs
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever

If the table top section is just a clean saw cut, you can smooth it up
nicely with a hand plane and straightedge. After the finished top suits
you, seal both sides with numerous soaking coats of sanding sealer
until no dull spots show up. Finish off with marine spar varnish and
give it a maintenance coat every year.
The table should outlive you.
Bugs

  #8   Report Post  
Posted to rec.woodworking
Wilson
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever

Bear in mind, I've never done this.
I love copper naphthanate so I soak outdoor wood in it and then stain. A
good stain forms an impervious layer and will bead up water until it
evaporates or runs off, so give the table a slight tilt to help runoff.
The thick section is probably not really dry, so I worry about trapping
moisture under varnishes and other such seals. For that reason, I'd leave
the bottom unstained, just preserved. With the airspace, it should dry out
eventually.
Wilson
"scott Doyland" wrote in message
ups.com...

Wilson wrote:
Use four 1/2" lag bolts long enough to go several inches into the stump.
Soak the top of stump with wood preservative.
Use 3/4 short pipe nipples and big washers to make spacers to hold the
top
off the stump.
Soak both sides of the top with preservative...copper naphthanate 19% if
you
can find it.
Cover the top with sheet metal or some old plexiglass when not in use and
it
should last quite a while.
Otherwise, really soak it with an oil/silicone stain. If you can get it
to
the point where water beads up on it, it may last quite a while.
If you can get access to a banding tool, three or four bands around the
top
would help stabilize it, but you may need new bands now and then as it
dries. I've never done this, but many things made from large sections of
wood are banded...like waterwheel shafts.
Wilson
"scott Doyland" wrote in message
ps.com...
Hi,



Thanks everyone for the help. One more question. Wilson - in your
posting you said to use preservative OR an olil/silcon stain. Is
there any benefit in using one more than the other, does the oll stain
pull out the water as you said if I can get water to bead up on it it
would last longer. Or should I be putting both on.

I think I may well get the slice sawn a bit neater first as by the
sounds of it I could end up with something that looks quite good,
rather then a bodge job as it started off as.

I wonder if a timber yard can cut it neatly for me or if the only way
is to try and chaionsaw off some of the excess lumps and bumps.

Scott



  #9   Report Post  
Posted to rec.woodworking
Tom Banes
 
Posts: n/a
Default slice of tree - how do I make it into a table with regards to drying or whatever

On 24 Apr 2006 07:40:28 -0700, "scott Doyland"
wrote:


In my garden I have a tree stump from a connifer tree that was cutdown
before I moved in, so at least over 2 years ago. Its started to grow
white hard/spongy fungus out of it.

What I've done for mounting tables to stumps is to whack out as much
of the soft center of the stump as I can with a hatchet, then fill the
cavity with sand-mix concrete. Try to get it slightly proud of the
wood, flatten it out with a board, stick in a few bolts heads down in
the concrete, leaving enough thread upright to go through the slab
top. Once the concrete is set, position the slab on the bolt faces,
give it a whack with a mallet to mark the hole positions and bore
holes through. Put a wood or metal spacer between the concrete and
slab bottom, counter bore the slab top for the nuts, and bolt it down.
The concrete stabilizes the stump rot to some extent.

Finish, as others have suggested, with LOTS of oil (tung oil works
well, but I have used Diesel - the smell goes away after a few weeks).
Soak top and bottom to reduce splitting, but it will probably split
here and there anyway. Melted crayon of an appropriate color can be
used to fill cracks if desired.

Regards.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Black Walnut Question tdstr Woodworking 19 April 12th 06 09:42 PM
MOREMONEY [email protected] Home Ownership 0 December 8th 05 05:13 AM
Table Slides For Three Leaf Expanding Dining Table Alan Smithee Woodworking 13 October 28th 05 02:42 PM
I have limited space, need a table that will accomodate different tools that I can adjust to the height of my workbench Eugene Woodworking 9 August 13th 04 08:32 AM
An Ultimate Router Table - Part I: A Short Story Unisaw A100 Woodworking 15 August 4th 04 11:43 PM


All times are GMT +1. The time now is 01:22 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"