Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
djs
 
Posts: n/a
Default Engraving Wood - What machines are available?

I found a few requests in the archives for information on engraving or
etching wood, but there wasn't many replies. Does any one have any
information on engraving or etching machines that can engrave or etch a
logo and/or other information on wood. I am interested in making
display cases for gift shops that have the company logo and other in
formation etched into a piece of wood about three feet long and a
couple inches high.

I would appreciate any information on either the machines that might be
available or where I could send out to have it done by someone else.

Thanks in advance,

djs

  #2   Report Post  
Posted to rec.woodworking
No
 
Posts: n/a
Default Engraving Wood - What machines are available?

"djs" wrote in message
ups.com...
I found a few requests in the archives for information on engraving or
etching wood, but there wasn't many replies. Does any one have any
information on engraving or etching machines that can engrave or etch a
logo and/or other information on wood. I am interested in making
display cases for gift shops that have the company logo and other in
formation etched into a piece of wood about three feet long and a
couple inches high.

I would appreciate any information on either the machines that might be
available or where I could send out to have it done by someone else.

Thanks in advance,

djs

I have never done it myself but have read about it. Essentially you will
have 4 options (off the top of my head)
Option 1 - CNC. CNC come in many forms. XY will give you two forward and
back plus left and right. XYZ will also give you up and down. Big $$$ and
steep learning curve. Designs done on computer for output to CNC machine.

Option 2 - Sandblasting. A template is created in a material impervious to
sandblast medium. Blast out the wood in the relief of the template.

Option 3 - handheld router - Using templates you will cut the lettering.

Option 4 - hand carving. Using sharpt tools and a lot of atristry you willl
make your signs.

IIRC - Norm did a NYW where some of these technigues may have been described
(Not sure about CNC)

Somone else with mroe experience may be ablle to give you opinions on these
and other techniques. If you find a good solution I would love to hear what
you came up with and how your final output looks.


  #3   Report Post  
Posted to rec.woodworking
cdo
 
Posts: n/a
Default Engraving Wood - What machines are available?

On 2 Mar 2006 10:23:17 -0800, "djs" wrote:

I found a few requests in the archives for information on engraving or
etching wood, but there wasn't many replies. Does any one have any
information on engraving or etching machines that can engrave or etch a
logo and/or other information on wood. I am interested in making
display cases for gift shops that have the company logo and other in
formation etched into a piece of wood about three feet long and a
couple inches high.

I would appreciate any information on either the machines that might be
available or where I could send out to have it done by someone else.

Thanks in advance,

djs



Look he

www.lhrtech.com

cliff
  #4   Report Post  
Posted to rec.woodworking
No
 
Posts: n/a
Default Engraving Wood - What machines are available?

"cdo" wrote in message
...
On 2 Mar 2006 10:23:17 -0800, "djs" wrote:

I found a few requests in the archives for information on engraving or
etching wood, but there wasn't many replies. Does any one have any
information on engraving or etching machines that can engrave or etch a
logo and/or other information on wood. I am interested in making
display cases for gift shops that have the company logo and other in
formation etched into a piece of wood about three feet long and a
couple inches high.

I would appreciate any information on either the machines that might be
available or where I could send out to have it done by someone else.

Thanks in advance,

djs



Look he

www.lhrtech.com

cliff


Cool


  #5   Report Post  
Posted to rec.woodworking
PCProffitt
 
Posts: n/a
Default Engraving Wood - What machines are available?

Not mentioned in the previous list was laser engraving. I use a laser
engraver on my work. The machine is very expensive, but you can always
sub out the engraving work until you get enough volume to buy something
to do it yourself.

Paul Proffitt
Suwanee, GA

No wrote:
"djs" wrote in message
ups.com...
I found a few requests in the archives for information on engraving or
etching wood, but there wasn't many replies. Does any one have any
information on engraving or etching machines that can engrave or etch a
logo and/or other information on wood. I am interested in making
display cases for gift shops that have the company logo and other in
formation etched into a piece of wood about three feet long and a
couple inches high.

I would appreciate any information on either the machines that might be
available or where I could send out to have it done by someone else.

Thanks in advance,

djs

I have never done it myself but have read about it. Essentially you will
have 4 options (off the top of my head)
Option 1 - CNC. CNC come in many forms. XY will give you two forward and
back plus left and right. XYZ will also give you up and down. Big $$$ and
steep learning curve. Designs done on computer for output to CNC machine.

Option 2 - Sandblasting. A template is created in a material impervious to
sandblast medium. Blast out the wood in the relief of the template.

Option 3 - handheld router - Using templates you will cut the lettering.

Option 4 - hand carving. Using sharpt tools and a lot of atristry you willl
make your signs.

IIRC - Norm did a NYW where some of these technigues may have been described
(Not sure about CNC)

Somone else with mroe experience may be ablle to give you opinions on these
and other techniques. If you find a good solution I would love to hear what
you came up with and how your final output looks.




  #6   Report Post  
Posted to rec.woodworking
Smaug Ichorfang
 
Posts: n/a
Default Engraving Wood - What machines are available?

Other methods (do google search) include something called a duplicarver
(you can make something similar), stencils (CMT makes kits, including a 3-D
one), and something called a pantograph - used to copy or enlarge/reduce a
drawing. Seems like it would be fairly easy to make something like the old
Koh-i-nor Rapidograph lettering system used by draftsmen, modified to use a
Dermel or cutter head.
  #7   Report Post  
Posted to rec.woodworking
djs
 
Posts: n/a
Default Engraving Wood - What machines are available?

That is a very neat machine. I am a little concerned that they will
only warrantee it for 400 hours of use. But it sure has some nice
possibilities. Thanks for the link!!
djs

  #8   Report Post  
Posted to rec.woodworking
Lee Michaels
 
Posts: n/a
Default Engraving Wood - What machines are available?


"djs" wrote in message
ups.com...
That is a very neat machine. I am a little concerned that they will
only warrantee it for 400 hours of use. But it sure has some nice
possibilities. Thanks for the link!!
djs


It looks to me that the machine's useful life will be totally dependent on
the hardness of material that you carve. And how much material you remove.
If your demands were not that great, it would probably last a long time. If
not, well, that is why they only warrenty if for 400 hours.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
### micro-FAQ on wood # 52 P van Rijckevorsel Woodworking 0 November 21st 05 07:03 PM
### micro-FAQ on wood # 035 P van Rijckevorsel Woodworking 0 April 1st 05 09:09 PM
### micro-FAQ on wood # 034 P van Rijckevorsel Woodworking 0 March 20th 05 03:47 PM
### micro-FAQ on wood # 023 P van Rijckevorsel Woodworking 0 November 1st 04 09:35 AM
### micro-FAQ on wood # 020 P van Rijckevorsel Woodworking 0 September 24th 04 08:44 AM


All times are GMT +1. The time now is 03:11 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"