Hi,

I have a few newbie questions regarding the Lamello Dosicol glue
applicator as used with biscuit joinery.

I read about it in Anthony Guidice's book: Quick & Easy Custom
Cabinets. (A great reference BTW.)

He gives this work aid a high recommendation. I've used it to build a
few projects and it does make quick work of spreading the glue around.
(Naturally after I bought it I found other much less expensive glue
applicators that supposedly work "just as good" but hey, I've got it,
I'm going to use it.)

Here's my questions:

So just how much glue are you supposed to put in your biscuit slots?

Nobody ever talks about that. You don't want so much glue in the slot
that it oozes out but how much is enough? The Dosicol has an
adjustment ring in the base of the unit. I fiddle with it but I'm
never really sure if I'm putting the "right" amount of glue in a #20
slot. I only want to depress the applicator one time per slot.

I haven't had any projects come apart. The joints seem plenty strong
but I sort of wonder about such things from time to time.

Maybe the slot doesn't really need an "exactly the right amount" of
glue in order to be a full strength joint?

I also get different reports on whether or not put also put glue, via
brush or dip method, on to the biscuit itself. (This would be in
addition to the glue you put in each side of the joint. This is the
method that Anthony Guidice recommends.) I've read/seen other via
videotapes that don't put the extra glue on the biscuit.

What do you think?

If you had a complex assembly, can you do a sectional glue up? (I
haven't experimented with this yet. I was sort of thinking that if you
applied glue to one side of the joint it would swell the biscuit up so
much you wouldn't be able to get the other half of the joint
together.)

Thanks for your help.

zug

"zug" wrote in message
news

Snip

I have owned this glue aplicator for about 15 years. I cannot remember the
last time that I used it.


Here's my questions:

So just how much glue are you supposed to put in your biscuit slots?

Enough that the biscuit is covered but not so much that when you squeeze the
joint together that you get a mess.


Nobody ever talks about that. You don't want so much glue in the slot
that it oozes out but how much is enough? The Dosicol has an
adjustment ring in the base of the unit. I fiddle with it but I'm
never really sure if I'm putting the "right" amount of glue in a #20
slot. I only want to depress the applicator one time per slot.

Yes you have to experiment with it. If you can see a bit more squeese out
at the biscuit spot vs. the other locations you have the plunger set about
right.

Snip

I also get different reports on whether or not put also put glue, via
brush or dip method, on to the biscuit itself. (This would be in
addition to the glue you put in each side of the joint. This is the
method that Anthony Guidice recommends.) I've read/seen other via
videotapes that don't put the extra glue on the biscuit.

What do you think?

I now use a regular bottle of glue and acid brush. I brush glue on the
biscuit only and place it in the slot after glueing the edge of the wood.

Basically I found that the despenser worked will once set up. Clean up was
way way too time consuming IMHO.
I have had no failures brushing the glue onto the biscuit and it takes
little time unless you plan on glueing all day long.

In article ,
"zug" wrote:

Hi,

I have a few newbie questions regarding the Lamello Dosicol glue
applicator as used with biscuit joinery.

Way back when..... I originally used the small glue bottle that came with the
original Lamello jointer. It is all I use today. The Dosicol was just not
convenient. When it came out, I HAD to have one.... should have bought a movie
and a bite to eat instead.
The original dispenser has two little grooves on opposing sides to the nipple
(relax, Larry..) which put glue on the inside of the groove. Very handy.
I see it around for 25-30 Canadian Dollars. It's Lamello.

Thank you both for your replys.

Zug

You want both sides of the grove wet, and you want no squeeze out when you
insert the biscuit. You do NOT put glue on the biscuit prior to
insertion, and the preferred glue for biscuits is Yellow Elhmers. FWIW my
shop uses 10K biscuits a year and we've been using biscuits 23 years now.

Rumpty


"zug" wrote in message
news
Hi,

I have a few newbie questions regarding the Lamello Dosicol glue
applicator as used with biscuit joinery.

I read about it in Anthony Guidice's book: Quick & Easy Custom
Cabinets. (A great reference BTW.)

He gives this work aid a high recommendation. I've used it to build a
few projects and it does make quick work of spreading the glue around.
(Naturally after I bought it I found other much less expensive glue
applicators that supposedly work "just as good" but hey, I've got it,
I'm going to use it.)

Here's my questions:

So just how much glue are you supposed to put in your biscuit slots?

Nobody ever talks about that. You don't want so much glue in the slot
that it oozes out but how much is enough? The Dosicol has an
adjustment ring in the base of the unit. I fiddle with it but I'm
never really sure if I'm putting the "right" amount of glue in a #20
slot. I only want to depress the applicator one time per slot.

I haven't had any projects come apart. The joints seem plenty strong
but I sort of wonder about such things from time to time.

Maybe the slot doesn't really need an "exactly the right amount" of
glue in order to be a full strength joint?

I also get different reports on whether or not put also put glue, via
brush or dip method, on to the biscuit itself. (This would be in
addition to the glue you put in each side of the joint. This is the
method that Anthony Guidice recommends.) I've read/seen other via
videotapes that don't put the extra glue on the biscuit.

What do you think?

If you had a complex assembly, can you do a sectional glue up? (I
haven't experimented with this yet. I was sort of thinking that if you
applied glue to one side of the joint it would swell the biscuit up so
much you wouldn't be able to get the other half of the joint
together.)

Thanks for your help.

zug

I take it that you believe in biscuits.

"Rumpty" wrote in message
news:0Mjqf.5472$u36.855@trndny01...
FWIW my
shop uses 10K biscuits a year and we've been using biscuits 23 years now.

Rumpty

In article ,
Robatoy wrote:

The original dispenser has two little grooves on opposing sides to the nipple
(relax, Larry..) which put glue on the inside of the groove. Very handy.
I see it around for 25-30 Canadian Dollars. It's Lamello.

I took a look at it in the shop, because I knew it had a name:
Lamello Minicol.

I take it that you believe in biscuits.

Actually my wife, kids and mortgage company believe in biscuits! Lot's of
negative comments float through the wreck from time to time about biscuits.
They are a great tool for woodworking, learn how to use them and your wife,
kids and mortgage company will be happy!

R


"CW" wrote in message
k.net...
I take it that you believe in biscuits.

"Rumpty" wrote in message
news:0Mjqf.5472$u36.855@trndny01...
FWIW my
shop uses 10K biscuits a year and we've been using biscuits 23 years now.

Rumpty

"Rumpty" wrote in message
news:BFxqf.1601$ul2.1166@trndny05...
I take it that you believe in biscuits.

Actually my wife, kids and mortgage company believe in biscuits! Lot's of
negative comments float through the wreck from time to time about
biscuits. They are a great tool for woodworking, learn how to use them and
your wife, kids and mortgage company will be happy!



A lot of Urban Myths follow the biscuits.

Not being a professional woodworker and having bought some tools over the
years that promised great things and really didn't deliver, I held out for
some time buying a biscuit joiner. I had also read a lot of those claims
about them being useless. Some months ago, I decided the only way I was
going to know for sure was to use one for a while. I bought the Dewalt. I
should have done this years ago. Great tool, excellent joints, very strong
and very fast. Wouldn't be without one now.

"Rumpty" wrote in message
news:BFxqf.1601$ul2.1166@trndny05...
I take it that you believe in biscuits.

Actually my wife, kids and mortgage company believe in biscuits! Lot's of
negative comments float through the wreck from time to time about
biscuits.
They are a great tool for woodworking, learn how to use them and your
wife,
kids and mortgage company will be happy!

In article BFxqf.1601$ul2.1166@trndny05, "Rumpty"
wrote:

I take it that you believe in biscuits.

Actually my wife, kids and mortgage company believe in biscuits! Lot's of
negative comments float through the wreck from time to time about biscuits.
They are a great tool for woodworking, learn how to use them and your wife,
kids and mortgage company will be happy!

I'm a huge biscuit fan. I did a whole bunch of tests (some on a bet) and
biscuits make too much sense not to use them.

You can't make a statement like that and leave it alone. Tests? We need
results. We're listening.

"Robatoy" wrote in message
...

I'm a huge biscuit fan. I did a whole bunch of tests (some on a bet) and
biscuits make too much sense not to use them.