Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
Keith
 
Posts: n/a
Default Building a table using Cherry

My wife wants a end table for the bedroom and would like it to match our
existing bedroom set which is cherry also. The cherry is a very dark color more
like walnut but as I have never using cherry before I'm not sure if I can get
cherry that dark. Any suggestions or advice. Thanks again
  #2   Report Post  
Posted to rec.woodworking
RonB
 
Posts: n/a
Default Building a table using Cherry

Cherry is a pretty good wood to work with and you should have no problem
staining it dark. Matching an existing piece of furniture is another thing
and I would recommend experimenting with scrap before you go to final
finish. One of cherry's characteristics is it will slowly darken with age
but this probably will not be a big deal if the existing furniture is fairly
new.

RonB

"Keith" wrote in message
...
My wife wants a end table for the bedroom and would like it to match our
existing bedroom set which is cherry also. The cherry is a very dark color
more
like walnut but as I have never using cherry before I'm not sure if I can
get
cherry that dark. Any suggestions or advice. Thanks again



  #3   Report Post  
Posted to rec.woodworking
Duke of Burl
 
Posts: n/a
Default Building a table using Cherry

Fume it or leave it out in the sun for a few days and it will darken
quite a bit on its own. That will age it and you can adjust the color
from there. If you make the match exact now, it will darken as it ages
and you'll end up with a piece that's too dark.

  #4   Report Post  
Posted to rec.woodworking
Andrew Barss
 
Posts: n/a
Default Building a table using Cherry

Keith wrote:
: My wife wants a end table for the bedroom and would like it to match our
: existing bedroom set which is cherry also. The cherry is a very dark color more
: like walnut but as I have never using cherry before I'm not sure if I can get
: cherry that dark. Any suggestions or advice. Thanks again

Is it genuine cheery, or "cherry"-finished wood? A lot of stuff out
there is aspen with a thick stain on it. Matching this will take
some trial and error.

- Andy Barss
  #5   Report Post  
Posted to rec.woodworking
Toller
 
Posts: n/a
Default Building a table using Cherry


"Keith" wrote in message
...
My wife wants a end table for the bedroom and would like it to match our
existing bedroom set which is cherry also. The cherry is a very dark color
more
like walnut but as I have never using cherry before I'm not sure if I can
get
cherry that dark. Any suggestions or advice. Thanks again


I had to match an Ethan Allen cherry chest that was a very dark brown. They
use tinted lacquer.
I found a medium dye followed by a medium stain gave perfect results.
Either a dark dye or a dark stain were very wrong.
It takes a certain amount of trial to get it right.

Was your bedroom set light when you bought it, and it has gotten darker over
the years? Then ignore the above and put your new end table out in the sun
for while to darken.




  #6   Report Post  
Posted to rec.woodworking
Keith
 
Posts: n/a
Default Building a table using Cherry

It's from Ethan Allen and was dark when it arrived. Thanks for all the
suggestions and I'm going to give it a try.

"Toller" wrote:


"Keith" wrote in message
.. .
My wife wants a end table for the bedroom and would like it to match our
existing bedroom set which is cherry also. The cherry is a very dark color
more
like walnut but as I have never using cherry before I'm not sure if I can
get
cherry that dark. Any suggestions or advice. Thanks again


I had to match an Ethan Allen cherry chest that was a very dark brown. They
use tinted lacquer.
I found a medium dye followed by a medium stain gave perfect results.
Either a dark dye or a dark stain were very wrong.
It takes a certain amount of trial to get it right.

Was your bedroom set light when you bought it, and it has gotten darker over
the years? Then ignore the above and put your new end table out in the sun
for while to darken.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Windsor Plywood Scam - Saskatoon James \(Garry\) Hunter Woodworking 19 January 4th 05 05:12 PM
Ping Pong Table [email protected] Woodworking 8 September 24th 04 10:26 PM
Old electrical wiring to outbuildings Nate Baxley Home Repair 11 July 19th 04 08:53 PM
Advice needed on Cherry table top Jerry Woodworking 7 March 26th 04 06:28 PM
New bandsaw saga PartII (long) Bruce Woodworking 0 December 30th 03 07:41 PM


All times are GMT +1. The time now is 10:55 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"