Home |
Search |
Today's Posts |
|
Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Filling Wood Cracks
"Keith Young" skrev i melding ... Hi Looking for additional Knowledge! Newbie here! What do most of you people use to fill cracks? i,ve tried filling with the sawdust and crazy glue. Problem is the glue is very hard to sand afterwards.Can you tell me some of your techniques. Also do you alway try to glue the cracks before they expand further. I don't fill cracks. The craks makes the wood burn better;-) Bjarte |
#2
|
|||
|
|||
Keith Young wrote:
Hi Looking for additional Knowledge! Newbie here! What do most of you people use to fill cracks? i,ve tried filling with the sawdust and crazy glue. Problem is the glue is very hard to sand afterwards.Can you tell me some of your techniques. Also do you alway try to glue the cracks before they expand further. I'll often use key shavings (from where they duplicate keys). I just pack the filings in, and secure w/water thin CA. Works well, looks a treat. I don't know that it adds much structural integrity but that's not usually the issue... ....Kevin -- Kevin Miller http://www.alaska.net/~atftb Juneau, Alaska |
#3
|
|||
|
|||
What do most of you people use to fill cracks? i,ve tried filling with
the sawdust and crazy glue. Problem is the glue is very hard to sand afterwards. I use finely ground coffee and CA. |
#4
|
|||
|
|||
"Keith Young" wrote in message ... Hi Looking for additional Knowledge! Newbie here! What do most of you people use to fill cracks? --------------------------------------------------------- One thing I have used is bras shavings from the local key shop.Free most of the time especially if you offer to sweep it up for them. ads a decretive touch to some things. Just fill the crack with CA, sprinkle in the shavings, recote with CA let dry and sand off..with the lathe Another option is gem stone sand. like Turquoise . (place small turquoise pebbles inside a folded piece of typing paper. smack it with a hammer. fill like my description above. sometimes I purposely cut grooves to use turquoise. looks especially good on Deer or elk antler pins. Mike ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
#5
|
|||
|
|||
Harry B. Pye wrote:
What do most of you people use to fill cracks? i,ve tried filling with the sawdust and crazy glue. Problem is the glue is very hard to sand afterwards. I use finely ground coffee and CA. That's an interesting approach. Do you just like the dark contrast or what? Is an espresso grind about right? ....Kevin -- Kevin Miller http://www.alaska.net/~atftb Juneau, Alaska |
#6
|
|||
|
|||
Kevin,
I use finely ground coffee and CA. That's an interesting approach. Do you just like the dark contrast or what? Is an espresso grind about right? I've been fooling around with a spalted wild cherry box. It developed a split in some really dark part of the wood. (A bark inclusion?) I took what ever coffee that was on hand and put a little on a hard surface. Used the cylindrical outside of my live center as a roller and crushed the coffee into a powder. Pushed this into the split and drizzled on some CA and the problem was gone. Coffee was almost a perfect match for the wood. Hope this helps, Harry |
#7
|
|||
|
|||
Hi Kevin
I have tried the ground coffee, filling a small hole (branch not there anymore kind off hole) it looks good, the only thing I found was it is kind of soft, so you have to watch the sanding or you have to start over again. I used just normal drip filter grind coffee. Have fun and take care Leo Van Der Loo Millers wrote: Harry B. Pye wrote: What do most of you people use to fill cracks? i,ve tried filling with the sawdust and crazy glue. Problem is the glue is very hard to sand afterwards. I use finely ground coffee and CA. That's an interesting approach. Do you just like the dark contrast or what? Is an espresso grind about right? ...Kevin |
#8
|
|||
|
|||
Don't know Keith, it might work with used coffee, I just used dry ground coffee. I don't like the sloppy stuffG Have fun and take care Leo Van Der Loo Keith Young wrote: Question? Left over or un perked coffee. Any preference. Doesn,t the CA harden it anyway? Keith "Leo Van Der Loo" wrote in message ... Hi Kevin I have tried the ground coffee, filling a small hole (branch not there anymore kind off hole) it looks good, the only thing I found was it is kind of soft, so you have to watch the sanding or you have to start over again. I used just normal drip filter grind coffee. Have fun and take care Leo Van Der Loo Millers wrote: Harry B. Pye wrote: What do most of you people use to fill cracks? i,ve tried filling with the sawdust and crazy glue. Problem is the glue is very hard to sand afterwards. I use finely ground coffee and CA. That's an interesting approach. Do you just like the dark contrast or what? Is an espresso grind about right? ...Kevin |
#9
|
|||
|
|||
I've used 5 minute epoxy and sanding dust from the same wood I'm working with.
I mix up enough epoxy, and mix in enough dust to make a thickish paste. The 5 minute type of epoxy gives me enough time to work, but not so long that I have to wait forever to work the piece. ****************************** Got wood? Check out my exotic hardwood pennywhistles at fair prices...http://www.Busmanwhistles.com |
#10
|
|||
|
|||
Fine grind, unused. Of course, it's oily, so you'll have to confine your
glues to those which can deal with oil. If you take bark from various woods, grind it in a coffee mill and use it, works just fine. Keep unground pieces around for trimming and stuffing into lager gaps. "Millers" wrote in message ... Harry B. Pye wrote: I use finely ground coffee and CA. That's an interesting approach. Do you just like the dark contrast or what? Is an espresso grind about right? |
#11
|
|||
|
|||
I bought some 'glitter' in a dispenser bottle, (I think it is mixed with
some sort of liquid glue) at the local Michael's Craft shop. It comes in various colours. Depending on the crack, I fill the crack with the dispenser nozzel then saturate the area with thin ca. This seems to hold just fine and you can vary the colour to suit. The ca glue does not seem to affect the glitter material and, so far, it has worn well. I have not tried this with larger cracks or pits but I cannot see why it wouldn't work just as well. If it is a bottle stopper I'm making, I finish it with water borne lacquer and this puts a layer of finish over the filling. I finish other forms with more traditional coverings such as blo and thinner and this works ok. I have tried filling cracks with key filings and I have found that this works best on small cracks; didn't look good at all on larger cracks, pits and voids. fwiw, Tom -- Remove the 'p' from 'shaw' to e-mail me. "Keith Young" wrote in message ... Hi Looking for additional Knowledge! Newbie here! What do most of you people use to fill cracks? i,ve tried filling with the sawdust and crazy glue. Problem is the glue is very hard to sand afterwards.Can you tell me some of your techniques. Also do you alway try to glue the cracks before they expand further. Thanks Keith |
#12
|
|||
|
|||
I've had great success with powdered or crushed stone - I use malachite and
chrysocola. For larger voids (up to 1/2") i drip in some thick CA, then set in crushed stone. I cover this with the fine crushings or powder, and drizzle on the water-thin CA. I use scrapers to cut the excess back - adds some very nice color and interest. One tip from experience - get the outside shape as close to finish as possible before filling. You can scrape and sand the stone back to the surface of the wood pretty easily, but cutting through the stone and the wood to change the shape is a lot of work! I got my stone from a place called "Arizona Sillhouettte" - I found them on-line at http://www.arizonasilhouette.com/. The usual disclaimers - I have no connection to them, satisfied customer only. Enjoy! Ron Williams Minn-Dak Woodturners Moorhead, MN "Keith Young" wrote in message ... Hi Looking for additional Knowledge! Newbie here! What do most of you people use to fill cracks? i,ve tried filling with the sawdust and crazy glue. Problem is the glue is very hard to sand afterwards.Can you tell me some of your techniques. Also do you alway try to glue the cracks before they expand further. Thanks Keith |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sanding Floor - filling cracks with sawdust and glue | UK diy | |||
### micro-FAQ on wood # 009 | Woodworking | |||
### everything you always wanted to know about wood (aka "micro-FAQ on wood") | Woodworking | |||
Exotic Wood Supplier in St. Louis | Woodworking |