Hi
I live in Spain but still have my house in Leeds. There is an external
chimney which runs from the kitchen (the old fireplace has been bricked up)
through a bedroom to the roof. Before I bought the house it was capped below
the roof tiles. In the bedroom I have quite sever damp, following the line
of the chimney(on the flat wall as the chimney is external). This does not
show in the kitchen which is below the bedroom. I am pretty sure no water is
getting in either through the wall into the chimney or through the top (it
is well sealed). There is an inspection point into the chimney about 5 foot
above ground level on the outside (now covered with a vent). I have put a
small vent in the bedroom directly into the chimney.I thought the problem
might be condensation which is why I put in the vents. The house is
now empty and without heating the problem has become much worse. I have a
tenant moving in very soon.

My Agent for the house asked a local builder to call and he seemed to advise
the opposite to what I did...to totally brick up all vents. I always
understood that u need an air circulation within the chimney.

So do I need more ventilation or none???

Any help would be much appreciated

Thank you

Nigel Smith
Torrevieja
Alicante Spain


NB

Thanks for all the help with my consumer unit wiring in Spain posted about
10 days ago


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.680 / Virus Database: 442 - Release Date: 09/05/2004

So do I need more ventilation or none???

Well, loads of ventilation isn't working, so you could try having none.

If there is already an external vent, I would be inclined not to have an
internal one. Ensure that the design of the external vent doesn't encourage
water to penetrate inwards.

Also, check the capping at the top, you may be mistaken about its integrity.

Christian.

Lago Jardin wrote in message ...
Hi
I live in Spain but still have my house in Leeds. There is an external
chimney which runs from the kitchen (the old fireplace has been bricked up)
through a bedroom to the roof. Before I bought the house it was capped
below
the roof tiles. In the bedroom I have quite sever damp, following the line
of the chimney(on the flat wall as the chimney is external). This does not
show in the kitchen which is below the bedroom. I am pretty sure no water
is
getting in either through the wall into the chimney or through the top (it
is well sealed). There is an inspection point into the chimney about 5 foot
above ground level on the outside (now covered with a vent). I have put a
small vent in the bedroom directly into the chimney.I thought the problem
might be condensation which is why I put in the vents. The house is
now empty and without heating the problem has become much worse. I have a
tenant moving in very soon.

My Agent for the house asked a local builder to call and he seemed to
advise
the opposite to what I did...to totally brick up all vents. I always
understood that u need an air circulation within the chimney.

So do I need more ventilation or none???

Any help would be much appreciated

Thank you

Nigel Smith
Torrevieja
Alicante Spain
I think the rule is that if the chimney is capped (and sealed) you have no
vents at all. If it just has a ridge tile or something over the top, you
should have vents.
That said, I still get a bit of damp on internal breasts due, I think, to
the single course of brick between the inside of the chimney and the
elements.
Not something you have to worry about down your way I hope. Isn't Alicante
supposed to have the best climate in Europe? Beats Malaga by a short head
IIRC.

Hi

A little extra info...

When I first moved in the house there were no vents at all and the problem
was there. The chimney is well sealed at the top (with slate and mortar)
under the roof tiles. I wouldn't say that I have vented it with massive
vents, just small ones. Since I put the very small vent high up on the
outside of the chimney a small drier patch has appeared in the bedroom on
the same level as the new vent but it hasn't spread out. As I've a tenant
coming in I've got to rely on the Agent getting a builder in as I'm a 1000
miles away. I just don't want them getting it wrong!!!

Question is...do I enlarge it....or seal them all up??

Yer Torrevieja is supposed to have best climate but guess what...its raining
heavily today after a pretty wet Spring!!!!! LOL




Thanks

Nigel

"stuart noble" wrote in message
...

Lago Jardin wrote in message ...
Hi
I live in Spain but still have my house in Leeds. There is an external
chimney which runs from the kitchen (the old fireplace has been bricked
up)
through a bedroom to the roof. Before I bought the house it was capped
below
the roof tiles. In the bedroom I have quite sever damp, following the
line
of the chimney(on the flat wall as the chimney is external). This does
not
show in the kitchen which is below the bedroom. I am pretty sure no water
is
getting in either through the wall into the chimney or through the top
(it
is well sealed). There is an inspection point into the chimney about 5
foot
above ground level on the outside (now covered with a vent). I have put a
small vent in the bedroom directly into the chimney.I thought the problem
might be condensation which is why I put in the vents. The house is
now empty and without heating the problem has become much worse. I have
a
tenant moving in very soon.

My Agent for the house asked a local builder to call and he seemed to
advise
the opposite to what I did...to totally brick up all vents. I always
understood that u need an air circulation within the chimney.

So do I need more ventilation or none???

Any help would be much appreciated

Thank you

Nigel Smith
Torrevieja
Alicante Spain
I think the rule is that if the chimney is capped (and sealed) you have no
vents at all. If it just has a ridge tile or something over the top, you
should have vents.
That said, I still get a bit of damp on internal breasts due, I think, to
the single course of brick between the inside of the chimney and the
elements.
Not something you have to worry about down your way I hope. Isn't Alicante
supposed to have the best climate in Europe? Beats Malaga by a short head
IIRC.




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.680 / Virus Database: 442 - Release Date: 09/05/2004

In article ,
"Lago Jardin" writes:
Hi
I live in Spain but still have my house in Leeds. There is an external
chimney which runs from the kitchen (the old fireplace has been bricked up)
through a bedroom to the roof. Before I bought the house it was capped below
the roof tiles. In the bedroom I have quite sever damp, following the line
of the chimney(on the flat wall as the chimney is external). This does not
show in the kitchen which is below the bedroom. I am pretty sure no water is
getting in either through the wall into the chimney or through the top (it
is well sealed). There is an inspection point into the chimney about 5 foot
above ground level on the outside (now covered with a vent). I have put a
small vent in the bedroom directly into the chimney.I thought the problem
might be condensation which is why I put in the vents. The house is
now empty and without heating the problem has become much worse. I have a
tenant moving in very soon.

My Agent for the house asked a local builder to call and he seemed to advise
the opposite to what I did...to totally brick up all vents. I always
understood that u need an air circulation within the chimney.

So do I need more ventilation or none???

You need a vent at the top and bottom of each flue, so air flows through
them and allows moisture which comes through the brickwork to dry out
(and water which comes down the pot if not capped off).

I recently found the plaster all blown on a chimney breast where the
fireplace had been bricked up. A vent had been left at the bottom but
subsequently wall-papered over. The pot had been removed from the top
(was loose) and capped with a slate (no ventilation). As the chimney
started getting wet, the gypsum plaster came away from the brickwork
and then stayed remarkably dry. I noticed when stripping paper that the
whole chimny breast would move if you pressed on it -- rather worrying;-)
but this turned out to be just the plaster. I removed the plaster (pretty
much came off in one piece, floor to 2/3rds way to ceiling). The brickwork
behind was soaking wet, and has taken about 3 months to dry out with the
fireplace opened up. It had probably been blocked off incorrectly for
at least 20 years.

I have installed a vent at the base of the flue (to the outside) and
another at the top (to the loft, as I can't get the the outside without
scaffolding). The fireplace has been opened out to the room as a feature
but sealed off from the flue.

--
Andrew Gabriel

hi Nigel,
might bump into you sometime - as I'm buying a property for refurbishment
not too far from you in spain!
Back to Leeds - have you ruled out all other sources of damp other than
condensation?
Is a gutter overflowing and running down the wall? Or a roof problem? Is the
pointing in sound condition - could driving rain penetrate the brickwork?
Looking at the brickwork outside may give a clue.
If it's a victorian house - make sure there's no lead pipes buried in the
wall just under the bedroom floor and leaking water from a tiny 'pinhole'.
If there's a bathroom close by, it's a possibility.
Hope that helps
Hugh


--
----------------------------------------------------------------------------
---------
view my philatelic items for sale on ebay at:
http://tinyurl.com/l32i
"Lago Jardin" wrote in message
. ..
Hi
I live in Spain but still have my house in Leeds. There is an external
chimney which runs from the kitchen (the old fireplace has been bricked
up)
through a bedroom to the roof. Before I bought the house it was capped
below
the roof tiles. In the bedroom I have quite sever damp, following the line
of the chimney(on the flat wall as the chimney is external). This does not
show in the kitchen which is below the bedroom. I am pretty sure no water
is
getting in either through the wall into the chimney or through the top (it
is well sealed). There is an inspection point into the chimney about 5
foot
above ground level on the outside (now covered with a vent). I have put a
small vent in the bedroom directly into the chimney.I thought the problem
might be condensation which is why I put in the vents. The house is
now empty and without heating the problem has become much worse. I have a
tenant moving in very soon.

My Agent for the house asked a local builder to call and he seemed to
advise
the opposite to what I did...to totally brick up all vents. I always
understood that u need an air circulation within the chimney.

So do I need more ventilation or none???

Any help would be much appreciated

Thank you

Nigel Smith
Torrevieja
Alicante Spain


NB

Thanks for all the help with my consumer unit wiring in Spain posted about
10 days ago


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.680 / Virus Database: 442 - Release Date: 09/05/2004

Hi Hugh

The outside is brickwork covered with render and recently painted. Looks
totally sound. The new external air brick at the top is only small, because
of the height and only using ladders we could only drill holes thru with a
long bit. The plumbing is all new copper...no pipes anywhere near the
problem. New square section plastic guttering which again seems OK. There
are 6 Tudor style detached in the Crescent. Others with similar capped
chimneys seem to have the same problem even after the attention of
builders!! That's what worries me. You see why I lean towards the
condensation theory??

I'm inclined to take Andrew's view at the moment but welcome any ideas so
that I know what to let the Agent actually do. They just want to send
anybody and spend my money!!

Thanks for replying and thanks to Andrew, Stuart, & Christian too for their
suggestions.

Nigel



"Hugh" wrote in message
...
hi Nigel,
might bump into you sometime - as I'm buying a property for refurbishment
not too far from you in spain!
Back to Leeds - have you ruled out all other sources of damp other than
condensation?
Is a gutter overflowing and running down the wall? Or a roof problem? Is
the
pointing in sound condition - could driving rain penetrate the brickwork?
Looking at the brickwork outside may give a clue.
If it's a victorian house - make sure there's no lead pipes buried in the
wall just under the bedroom floor and leaking water from a tiny 'pinhole'.
If there's a bathroom close by, it's a possibility.
Hope that helps
Hugh


--
--------------------------------------------------------------------------
--
---------
view my philatelic items for sale on ebay at:
http://tinyurl.com/l32i
"Lago Jardin" wrote in message
. ..
Hi
I live in Spain but still have my house in Leeds. There is an external
chimney which runs from the kitchen (the old fireplace has been bricked
up)
through a bedroom to the roof. Before I bought the house it was capped
below
the roof tiles. In the bedroom I have quite sever damp, following the
line
of the chimney(on the flat wall as the chimney is external). This does
not
show in the kitchen which is below the bedroom. I am pretty sure no
water
is
getting in either through the wall into the chimney or through the top
(it
is well sealed). There is an inspection point into the chimney about 5
foot
above ground level on the outside (now covered with a vent). I have put
a
small vent in the bedroom directly into the chimney.I thought the
problem
might be condensation which is why I put in the vents. The house is
now empty and without heating the problem has become much worse. I have
a
tenant moving in very soon.

My Agent for the house asked a local builder to call and he seemed to
advise
the opposite to what I did...to totally brick up all vents. I always
understood that u need an air circulation within the chimney.

So do I need more ventilation or none???

Any help would be much appreciated

Thank you

Nigel Smith
Torrevieja
Alicante Spain


NB

Thanks for all the help with my consumer unit wiring in Spain posted
about
10 days ago


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.680 / Virus Database: 442 - Release Date: 09/05/2004






---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.680 / Virus Database: 442 - Release Date: 09/05/2004

Lago Jardin wrote:

Hi
I live in Spain but still have my house in Leeds. There is an external
chimney which runs from the kitchen (the old fireplace has been bricked up)
through a bedroom to the roof. Before I bought the house it was capped below
the roof tiles. In the bedroom I have quite sever damp, following the line
of the chimney(on the flat wall as the chimney is external). This does not
show in the kitchen which is below the bedroom. I am pretty sure no water is
getting in either through the wall into the chimney or through the top (it
is well sealed). There is an inspection point into the chimney about 5 foot
above ground level on the outside (now covered with a vent). I have put a
small vent in the bedroom directly into the chimney.I thought the problem
might be condensation which is why I put in the vents. The house is
now empty and without heating the problem has become much worse. I have a
tenant moving in very soon.

My Agent for the house asked a local builder to call and he seemed to advise
the opposite to what I did...to totally brick up all vents. I always
understood that u need an air circulation within the chimney.

So do I need more ventilation or none???

Any help would be much appreciated

Thank you

Nigel Smith
Torrevieja
Alicante Spain

NB

Thanks for all the help with my consumer unit wiring in Spain posted about
10 days ago

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.680 / Virus Database: 442 - Release Date: 09/05/2004

Was there a slow burning solid fuel stove or range originally in
the kitchen venting into the chimney?
If so it may be that acidic flue gases condensed in the upper
part of the chimney and created a hygroscopic sulphate that
absorbs moisture from the atmosphere and causes a growing damp
patch.
Does the damp patch grow black mould on it? If not this is an
indication that the damp may be slightly acidic. I believe that
sealing the plaster may be a possible cure, but the certain way
is to replace the plaster.
I have a similar problem. The flue is ventilated top and bottom
but I think that this might have made the problem worse. Maybe
sealing the flue is the answer.

hth

Al