DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   How best to disguise a very small porcelain chip? (https://www.diybanter.com/uk-diy/84659-how-best-disguise-very-small-porcelain-chip.html)

Broadback January 1st 05 02:58 PM

How best to disguise a very small porcelain chip?
 
I have just installed a new toilet, rather to my dismay when I came to
"polish off" the job what I thought was a black mark on the cistern is a
very small chip. As I bought the toilet some time ago I don't think it
would be reasonable for the retailer to replace it. Is there a way of
"painting" this blemish over? Any suggestions appreciated.

Newshound January 1st 05 04:39 PM

Tipex?

Is there a way of "painting" this blemish over? Any suggestions

appreciated.



Stephen Dawson January 1st 05 05:23 PM


"Broadback" wrote in message
...
I have just installed a new toilet, rather to my dismay when I came to
"polish off" the job what I thought was a black mark on the cistern is a
very small chip. As I bought the toilet some time ago I don't think it
would be reasonable for the retailer to replace it. Is there a way of
"painting" this blemish over? Any suggestions appreciated.


A hat, dark glasses and a fake moustache ?? :-)



Mike Harrison January 1st 05 06:33 PM

On Sat, 01 Jan 2005 14:58:59 +0000, Broadback wrote:

I have just installed a new toilet, rather to my dismay when I came to
"polish off" the job what I thought was a black mark on the cistern is a
very small chip. As I bought the toilet some time ago I don't think it
would be reasonable for the retailer to replace it. Is there a way of
"painting" this blemish over? Any suggestions appreciated.


White enamel - try a model shop, White car paint (spray into cup and apply with brush), white
Hammerite




The Natural Philosopher January 1st 05 07:42 PM

Broadback wrote:

I have just installed a new toilet, rather to my dismay when I came to
"polish off" the job what I thought was a black mark on the cistern is a
very small chip. As I bought the toilet some time ago I don't think it
would be reasonable for the retailer to replace it. Is there a way of
"painting" this blemish over? Any suggestions appreciated.


Ask your dentist nicely.

Rob Morley January 2nd 05 05:53 AM

In article , "Mike
Harrison" says...
snip

White enamel - try a model shop, White car paint (spray into cup and apply with brush),


Why not just buy a tin of brushing cellulose? Much better VFM than
aerosols.


Broadback January 9th 05 01:27 PM

The Natural Philosopher wrote:

Broadback wrote:

I have just installed a new toilet, rather to my dismay when I came to
"polish off" the job what I thought was a black mark on the cistern is
a very small chip. As I bought the toilet some time ago I don't think
it would be reasonable for the retailer to replace it. Is there a way
of "painting" this blemish over? Any suggestions appreciated.



Ask your dentist nicely.

Thanks you all for you help, problem now resolved. I purchased the item
mid October from a local plumbers merchants (Jones & Shufflebottom), I
gave them a ring after the New Year, conversation went like this.
"I bought, among other things, a cistern from you last October. I only
got around to installing it just before Christmas, when I came to clean
it what I though was a black mark was a small chip. Any ideas?"
"Certainly, we will order replacement now and phone you when it arrives,
no charge."_
Now I remember why I go to local suppliers when possible.

Peter Scott February 1st 05 05:54 PM


"Broadback" wrote in message
...
I have just installed a new toilet, rather to my dismay when I came to
"polish off" the job what I thought was a black mark on the cistern is a
very small chip. As I bought the toilet some time ago I don't think it
would be reasonable for the retailer to replace it. Is there a way of
"painting" this blemish over? Any suggestions appreciated.


I've a similar problem with a Belfast sink. I am going to try
a white epoxy filler similar to the stuff you use on car bodies.
I've already filled the deeper part of the (quite large) chip
and it has survived water, detergent and other chemicals. I am
therefore quite hopeful. I'll polish it with increasingly fine wet and
dry papers.

Anyone think I'm barking up the wrong tree?

Peter Scott




All times are GMT +1. The time now is 04:27 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter