[AL_n]

My house has a UPVC front door. I would like to change it to a hardwood
one. Obtaining a hardwood door is easy enough, but I could use some advice
on what to do about the frame. What is the usual procedure? Is it best to
find a reaady-made frame, or is it best to make one? Does it need to be
hardwood, or will pine do? Is it feasable to use the old UPVC frame,
somehow?

TIA

Al

[The Natural Philosopher[_2_]]

AL_n wrote:
My house has a UPVC front door. I would like to change it to a hardwood
one. Obtaining a hardwood door is easy enough, but I could use some advice
on what to do about the frame. What is the usual procedure? Is it best to
find a reaady-made frame, or is it best to make one? Does it need to be
hardwood, or will pine do? Is it feasable to use the old UPVC frame,
somehow?

TIA

Al
Don't spoil the ship..

get a frame AND a door to match.

Most joiners will supply this as a matter of course.

Screw frame into place with spacers to get it perfectly aligned, and
then foam up and render or mastic the edges. Stain first to reduce
moisture absorption, esp. near ground.