Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Covering expanding PU foam around windows and doors
On 21 Sep, 10:36, David W E Roberts
wrote: On Linux at the moment - so different news server. I have finally filled all the gaps around the doors and windows with expanding PU foam and now need to finish off. It is easy(ish) to cut the foam back to flush with the frames but much more difficult to create a (say) 2mm rebate for flexible filler or (in the case of some of the larger gaps around the door frames (blush) to point up with mortar. piece of wood with "a few" nails through the end, protruding as far as you want the rebate deep. cut cured foam flush to frames (I find it simplest with a wide chisel or 1inch filling knife) then abrade with your "scratching stick" to make the rebate? Jim K |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Covering expanding PU foam around windows and doors | UK diy | |||
Expanding foam behind CU | UK diy | |||
expanding foam HELP | UK diy | |||
Expanding foam and UV | UK diy |