UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 9
Default Truss Hanger sizes and naming

I want to buy some "Multi Truss Hangers", for hanging 150mm deep wooden
joists from 200mm deep wooden beams. They look like these:
http://www.screwfix.com/prods/95710/...5mm-Pack-of-10
http://www.tradefixdirect.com/produc...oducts_id=5385

I haven't found an on-line supplier yet that actually specifies the
dimensions of the hanger.

I want the tops of the joists to be level with the tops of the beams, so I
want the want the hanger's "slot" to be no more than 150mm deep.

Can anyone point me to somewhere on-line I can buy some?



  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,379
Default Truss Hanger sizes and naming

On 3 July, 17:59, "Mr UPVC" Mr wrote:
I want to buy some "Multi Truss Hangers", for hanging 150mm deep wooden
joists from 200mm deep wooden beams. They look like these:http://www.screwfix.com/prods/95710/...oducts_id=5385

I haven't found an on-line supplier yet that actually specifies the
dimensions of the hanger.

I want the tops of the joists to be level with the tops of the beams, so I
want the want the hanger's "slot" to be no more than 150mm deep.

Can anyone point me to somewhere on-line I can buy some?


I'm pretty sure the screwfix one is 150mm deep. If it proves slightly
too deep though, just put a bit of packing under the joist.

I used them for timber to masonry, using multimonti in the large
holes.

However for timber to timber applications, you might want to choose
the type that wrap over the top of the beam, for the better load
characteristics.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
In God we truss Roland Butter[_2_] UK diy 6 August 5th 08 02:14 PM
Naming lathe parts Nick Müller Metalworking 11 March 26th 06 05:50 AM
Naming drill bits (HSS, HSS-E, HSS G, ...) Nick Müller Metalworking 0 March 14th 06 10:42 PM
Help please with joint naming Vaughn Woodworking 22 February 26th 06 02:47 AM
Moving radiators / rad naming conventions Colin Wilson UK diy 13 February 7th 05 09:16 PM


All times are GMT +1. The time now is 03:31 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"