UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 530
Default Plasterboard thicknesses

Can I assume that a new plasterboard wall will have plasterboard of a
certain thickness? Is there a standard thickness that builders will
typically choose for walls?

Daniele
  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,379
Default Plasterboard thicknesses

On 25 Apr, 10:35, (D.M.
Procida) wrote:
Can I assume that a new plasterboard wall will have plasterboard of a
certain thickness? Is there a standard thickness that builders will
typically choose for walls?

Daniele


Comes in 9, 12 and 15mm. 12mm is by far the most commonly used by
builders.

Exceptions are when a higher level of either fire protection or
soundproofing is required by building regs (usually between dwellings,
or occasionally on higher floors within dwellings etc). A double layer
of 12mm is often used for these situations.
  #3   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 3,703
Default Plasterboard thicknesses

In article
,
D.M. Procida writes
Can I assume that a new plasterboard wall will have plasterboard of a
certain thickness? Is there a standard thickness that builders will
typically choose for walls?

It's up to you to specify what you want, either 9mm or 12mm. Left to
their own devices, the average builder will likely use the
thinner/cheaper option.

Personally I would use 12mm as it is less likely to wobble like a set
from prisoner cell block H.

I assume you mean a wooden stud partition? For standard large sheets of
plasterboards (1200x2400mm) you can choose stud spacings of either 400
or 600mm (to line up with sheet boundaries) with lesser spacings giving
greater rigidity. My personal preference would be 400mm but 600 may be
adequate depending on the application.

See: http://wiki.diyfaq.org.uk/index.php?...Partition_Wall for tips
--
fred
FIVE TV's superbright logo - not the DOG's, it's ********
  #4   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 39,563
Default Plasterboard thicknesses

D.M. Procida wrote:
Can I assume that a new plasterboard wall will have plasterboard of a
certain thickness? Is there a standard thickness that builders will
typically choose for walls?


12.5mm

Daniele

  #5   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,447
Default Plasterboard thicknesses

On Apr 25, 8:54*am, The Natural Philosopher
wrote:
D.M. Procida wrote:
Can I assume that a new plasterboard wall will have plasterboard of a
certain thickness? Is there a standard thickness that builders will
typically choose for walls?


12.5mm



Daniele- Hide quoted text -


- Show quoted text -


Similar here ........... Canada s'posed to be metric but many things
still rated in US fashion.

'Gyproc' (gypsum board/plasterboard) ............... neighbour is
rebuilding his basement.
His wood frame house, built 40 years like this one used 3/8th
throughout. He is redoing any walls that he changes with half inch
(12mm) on 16 inch (400mm) studs. But will reapply 3/8th (approx. 9mm)
on ceilings on 12 inch (300mm) spaced strapping. ironically the 3/8th
costs slightly more than the 1/2 inch. But is easier to lift and apply
to the ceilings!
Finding that the quality of some of the 12 mm. is very crumbly and the
corners break very easily.
He is not using 5/8th (16mm) anywhere although it is a new standard
for certain construction.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mismatched floorboard thicknesses Lobster UK diy 9 May 19th 06 09:15 PM
New Part L1b and cavity wall thicknesses dg UK diy 5 April 15th 06 11:25 PM
Drawers 1...5, materials, thicknesses, joints, width (max) bent Woodworking 13 November 15th 05 05:36 AM
Plasterboard bronkone7 UK diy 12 August 1st 05 12:04 AM
Where to buy plasterboard? Bob Eager UK diy 11 December 13th 03 01:02 AM


All times are GMT +1. The time now is 08:33 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"