Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
Two types of tile cutter I see widely used, the "table saw" type with
a diamond wheel and the tile slid through it (or the wheel slides over the tile), - or the score-and-crack type. Which would work best for large porcelain tiles (600mm by 600mm, about 8mm thick)? I borrowed a friends table saw type (which is too small for these tiles - but allowed me to at least try taking a slice off one edge) - and it cuts them, smoothly but very slowly. So do I need to get a hold of a larger/professional model, or is score- and-crack better on porcelain? I also need to do an irregularly shaped cut-out on a tile or two to fit around a shower valve. What is going to work well for porcelain tiles for irregular cut-outs? |
#2
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
|
#3
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
On Wed, 10 Feb 2010 09:12:43 -0800 (PST)
" wrote: Two types of tile cutter I see widely used, the "table saw" type with a diamond wheel and the tile slid through it (or the wheel slides over the tile), - or the score-and-crack type. Which would work best for large porcelain tiles (600mm by 600mm, about 8mm thick)? I borrowed a friends table saw type (which is too small for these tiles - but allowed me to at least try taking a slice off one edge) - and it cuts them, smoothly but very slowly. So do I need to get a hold of a larger/professional model, or is score- and-crack better on porcelain? I also need to do an irregularly shaped cut-out on a tile or two to fit around a shower valve. What is going to work well for porcelain tiles for irregular cut-outs? I used a table saw type for 600x300 10mm porcelain tiles, no problem, a little ingenuity needed to support them. For big holes I used a diamond core drill, for odd shapes an angle grinder and dry diamond wheel. The biggest problem with big tiles is getting a flat substrate. Floors are best self-levelled, walls maybe marmox or another tile backer. Oh, yes, and work from a good support, e.g. a batten or floor up, no adhesive has the power to hold a 600x without slip. R. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
On Feb 10, 5:12 pm, " wrote:
Two types of tile cutter I see widely used, the "table saw" type with a diamond wheel and the tile slid through it (or the wheel slides over the tile), - or the score-and-crack type. Which would work best for large porcelain tiles (600mm by 600mm, about 8mm thick)? I borrowed a friends table saw type (which is too small for these tiles - but allowed me to at least try taking a slice off one edge) - and it cuts them, smoothly but very slowly. So do I need to get a hold of a larger/professional model, or is score- and-crack better on porcelain? I also need to do an irregularly shaped cut-out on a tile or two to fit around a shower valve. What is going to work well for porcelain tiles for irregular cut-outs? having rented a big leccy one and subsequently bought a cheapo leccy one - if i were doing it I'd find the 30/40 quid to hire the big one - definitely easier = less stress! cutting big tiles. Cuts seemed "better" on the big one but that was 10mm limestone vs ceramic floor & wall tiles on the smaller one so direct comparison tricky...... To be frank small one is a PITA with large format tiles - yes it will cut them but consider the agro of holding and moving the tiles - IMHO easier on a bigger pro m/c and quicker. Cheers JimK |
#6
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
TheOldFellow wrote:
On Wed, 10 Feb 2010 09:12:43 -0800 (PST) " wrote: Two types of tile cutter I see widely used, the "table saw" type with a diamond wheel and the tile slid through it (or the wheel slides over the tile), - or the score-and-crack type. Which would work best for large porcelain tiles (600mm by 600mm, about 8mm thick)? I borrowed a friends table saw type (which is too small for these tiles - but allowed me to at least try taking a slice off one edge) - and it cuts them, smoothly but very slowly. So do I need to get a hold of a larger/professional model, or is score- and-crack better on porcelain? I also need to do an irregularly shaped cut-out on a tile or two to fit around a shower valve. What is going to work well for porcelain tiles for irregular cut-outs? I used a table saw type for 600x300 10mm porcelain tiles, no problem, a little ingenuity needed to support them. For big holes I used a diamond core drill, for odd shapes an angle grinder and dry diamond wheel. The biggest problem with big tiles is getting a flat substrate. Floors are best self-levelled, walls maybe marmox or another tile backer. Oh, yes, and work from a good support, e.g. a batten or floor up, no adhesive has the power to hold a 600x without slip. No need or that. Use strings and a level, and thick rapid set cement. Its no more expensive than self levelling, which doesn't, anyway. R. |
#7
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
The Natural Philosopher
wibbled on Wednesday 10 February 2010 19:56 Its no more expensive than self levelling, which doesn't, anyway. Er, it does if you use the right stuff and prep it correctly... -- Tim Watts Managers, politicians and environmentalists: Nature's carbon buffer. |
#9
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
Not quite sure what you mean by 'too small'
I need to cut 600 * 600mm tiles, so when I need to halve a tile - there needs to be 300mm between blade and fence. |
#10
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
I tiled a whole bathroom in very hard porcelain tiles using an Exakt saw
(purple version) and diamond blade: http://www.fredshed.co.uk/exaktprecisionsaw.htm (DIY version also on Amazon). I found the best technique with straight cuts was to saw a groove about half way through the thickness of the tile and then snap. For more complex cuts, saw as deep as the tool will go and then nibble with pincers. This tool is also great for laminate flooring. I've also used it to cut down a stainless steel splashback. When cutting thin sheet metal, it doesn't distort the edge like a jigsaw does. There are a few downsides, but I don't believe they detract seriously from the usefulness of this tool: 1. It's awkward making blind cuts as you can't see the blade and have to rely on a scale on the side of the tool. 2. The max. depth of cut is limited to around 14 mm (less for the DIY version). 3. You must use vacuum extraction (but a hose is supplied to connect to a domestic vacuum cleaner). Hope this helps, Roger. |
#11
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
|
#12
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
On Feb 11, 7:50 am, " wrote:
Not quite sure what you mean by 'too small' I need to cut 600 * 600mm tiles, so when I need to halve a tile - there needs to be 300mm between blade and fence. fence? :))))) - F for freehand mate - couldn;t get the cheapy set up true so the back of the blade would splinter the cut edge as it went by right PITA - don;t remember that being a prob with the hired one, but still did most freehand. Cheers JimK |
#13
Posted to uk.d-i-y
|
|||
|
|||
Cutting 600mm porcelain tiles - how?
In article
, JimK wrote: On Feb 11, 7:50 am, " wrote: Not quite sure what you mean by 'too small' I need to cut 600 * 600mm tiles, so when I need to halve a tile - there needs to be 300mm between blade and fence. fence? :))))) - F for freehand mate - couldn;t get the cheapy set up true so the back of the blade would splinter the cut edge as it went by right PITA - don;t remember that being a prob with the hired one, but still did most freehand. I must admit if I had many to do and wanted them all the same size - like say at the top of a wall - I'd prefer a fence. My 'top of the range' Plasplugs one has a big enough table for any I've used. Although I've not used 600 x 600mm tiles. I'd probably hire if I needed to. -- *Why do we say something is out of whack? What is a whack? * Dave Plowman London SW To e-mail, change noise into sound. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cutting Porcelain Floor Tiles | UK diy | |||
Source for 600mm sq tiles | UK diy | |||
Porcelain tiles | UK diy | |||
Drilling and cutting porcelain tiles? | UK diy | |||
Cutting porcelain floor tiles | UK diy |