Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
CFL with Dusk-to-Dawn sensor
I've just fitted an exterior light with dusk-to-dawn sensor which
specifies an E27 11W ES lamp. Bought E27 11W ES and then discovered it says not to be used with dusk- to-dawn sensors. Put lamp in anyway, and it works. Why wouldn't it work and am I shortening the life of the lamp by using it with a d2d? |
#2
Posted to uk.d-i-y
|
|||
|
|||
CFL with Dusk-to-Dawn sensor
"mike" wrote in message ... I've just fitted an exterior light with dusk-to-dawn sensor which specifies an E27 11W ES lamp. Bought E27 11W ES and then discovered it says not to be used with dusk- to-dawn sensors. Put lamp in anyway, and it works. Why wouldn't it work and am I shortening the life of the lamp by using it with a d2d? Some D2D sensors are just light dependent resistors and they effectively lower the voltage on the lamp when its bright. This is a no no with CFL. Better D2D sensors are proper switches. You can spot the cheap nasty ones at dusk/dawn as the lamp dims and flickers even with tungsten bulbs. |
#3
Posted to uk.d-i-y
|
|||
|
|||
CFL with Dusk-to-Dawn sensor
mike wrote:
I've just fitted an exterior light with dusk-to-dawn sensor which specifies an E27 11W ES lamp. Bought E27 11W ES and then discovered it says not to be used with dusk- to-dawn sensors. Put lamp in anyway, and it works. Why wouldn't it work and am I shortening the life of the lamp by using it with a d2d? Some D2D sensors are designed to be fitted as if they were ordinary light switches, and hence need to work without a neutral connection. Most of these do that by drawing a very small current through the lamp. You can't do that with a CFL lamp. The type you fitted does not have this limitation. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#4
Posted to uk.d-i-y
|
|||
|
|||
CFL with Dusk-to-Dawn sensor
mike wrote:
I've just fitted an exterior light with dusk-to-dawn sensor which specifies an E27 11W ES lamp. Bought E27 11W ES and then discovered it says not to be used with dusk- to-dawn sensors. Put lamp in anyway, and it works. Why wouldn't it work and am I shortening the life of the lamp by using it with a d2d? I've got an exterior light outside with a 11w es lamp and a d2d sensor. Been there 3 - 4 years, got it from Wickes. -- Dave - The Medway Handyman www.medwayhandyman.co.uk |
#5
Posted to uk.d-i-y
|
|||
|
|||
CFL with Dusk-to-Dawn sensor
The Medway Handyman wrote:
mike wrote: I've just fitted an exterior light with dusk-to-dawn sensor which specifies an E27 11W ES lamp. Bought E27 11W ES and then discovered it says not to be used with dusk- to-dawn sensors. Put lamp in anyway, and it works. Why wouldn't it work and am I shortening the life of the lamp by using it with a d2d? I've got an exterior light outside with a 11w es lamp and a d2d sensor. Been there 3 - 4 years, got it from Wickes. Snap. It's not been a problem. I think that's been up 5years plus replacing a similar fitting that had worked satisfactorily for possibly eight years with only one lamp being replaced. Fitting was replaced due to sunlight crazing the plastic lens. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
PIR v Dawn Dusk | UK diy | |||
Everspring dusk-to-dawn bulkhead light | UK diy | |||
Dusk to Dawn Bulbs | UK diy | |||
Dawn/Dusk Sensors | UK diy | |||
motion sensor light stuck on dusk-to-dawn mode | Home Repair |