Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Liquid PTFE cure time?
Anyone have any idea what the approximate cure time for "No Nonsense"
liquid PTFE is? Cheers, Styx |
#2
Posted to uk.d-i-y
|
|||
|
|||
Liquid PTFE cure time?
On Sat, 05 Apr 2008 19:28:51 +0100, Styx wrote:
Anyone have any idea what the approximate cure time for "No Nonsense" liquid PTFE is? I've started using this. It's not a easy to use as the Loctite product which has a nice bellows style squeezable container. I would have said that used in the right place you need not worry about setting time. Used to do tricks (like setting screwed elbow fitting at the right position as opposed to tight) you might need it to leave it a day to harden. -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at http://www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html |
#3
Posted to uk.d-i-y
|
|||
|
|||
Liquid PTFE cure time?
Ed Sirett wrote:
On Sat, 05 Apr 2008 19:28:51 +0100, Styx wrote: Anyone have any idea what the approximate cure time for "No Nonsense" liquid PTFE is? I've started using this. It's not a easy to use as the Loctite product which has a nice bellows style squeezable container. I would have said that used in the right place you need not worry about setting time. Used to do tricks (like setting screwed elbow fitting at the right position as opposed to tight) you might need it to leave it a day to harden. Thanks, Ed. Yes, I agree that it's not very easy to use. Well, after about 18 hours it doesn't seem to have cured at all -- to be fair, it was pretty cold last night so that's possibly had an effect on it. I'll take another look at it later today to see how it's going. Styx |
#4
Posted to uk.d-i-y
|
|||
|
|||
Liquid PTFE cure time?
Styx wrote: Ed Sirett wrote: On Sat, 05 Apr 2008 19:28:51 +0100, Styx wrote: Anyone have any idea what the approximate cure time for "No Nonsense" liquid PTFE is? I've started using this. It's not a easy to use as the Loctite product which has a nice bellows style squeezable container. Agreed: I resorted to trying to balance it upside down on its cap between uses because it's so viscous. snip Thanks, Ed. Yes, I agree that it's not very easy to use. Well, after about 18 hours it doesn't seem to have cured at all -- to be fair, it was pretty cold last night so that's possibly had an effect on it. AIUI, it hardens in some metal-catalysed way, so in the confines of a joint it may well have cured. The other implication of this is that it would be no use hoping to use it to seal plastic to plastic. I used it for almost all of the appropriate joints in a complete ch installation, and was very impressed. Not a single leak, even from the usually difficult valve tail to radiator joints. I did some of these without ptfe tape, and some with it (where the valve threatened to disappear entirely into the rad), but all were successful. -- Kevin Poole ****Use current date to reply (e.g. )**** |
#5
Posted to uk.d-i-y
|
|||
|
|||
Liquid PTFE cure time?
"Ed Sirett" wrote in message ... On Sat, 05 Apr 2008 19:28:51 +0100, Styx wrote: Anyone have any idea what the approximate cure time for "No Nonsense" liquid PTFE is? I've started using this. It's not a easy to use as the Loctite product which has a nice bellows style squeezable container. I've found the same thing, it works well, but the tube needs a firm hand. I would have said that used in the right place you need not worry about setting time. Used to do tricks (like setting screwed elbow fitting at the right position as opposed to tight) you might need it to leave it a day to harden. I'm not sure it cures at all. Whilst Loctite would set & hold a fitting in a certain position, I don't think liquid PTFE is meant to do the same. JMO -- Dave - The Medway Handyman www.medwayhandyman.co.uk 01634 717930 07850 597257 |
#6
Posted to uk.d-i-y
|
|||
|
|||
Liquid PTFE cure time?
Styx wrote:
Anyone have any idea what the approximate cure time for "No Nonsense" liquid PTFE is? Will it work on a frying pan? Dave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Liquid Stucco and Liquid Siding | Home Repair | |||
Liquid PTFE | UK diy | |||
Driveway refinishing cure time? | Home Repair | |||
time for wood floor to cure? | Woodworking | |||
Liquid Siding and Liquid Stucco | Home Ownership |