A DIY & home improvement forum. DIYbanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » DIYbanter forum » Do - it - Yourself » UK diy
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

tile cutting: large circles



 
 
LinkBack Thread Tools Display Modes
  #1  
Old December 8th 06, 12:10 AM posted to uk.d-i-y
external usenet poster
 
Posts: 635
Default tile cutting: large circles

wrote:
I'm tiling the toilet floor, only there's a soil pipe in the way! I
saw these circular cutters that look like something from a gerbil's
cage but they only go up to about 90mm and of course soil pipes are
that little bit bigger. I thought cutting a hole and plonking it over
the top would be prettier than cutting a chunk out of a tile, albeit
that it will be hidden behind the toilet. Just wondered if anyone had
seen a larger (say to 6 inch diameter) tile cutter?

Thanks,
Stephen.


What about a tile-cutting blade in a jig saw? Or a tile "blade" in a
dremel-type tool. Or even lowering the tile carefully over a
plasplugs-type tile cutter with the guard removed?

Dave
Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
cutting out 4" circles of 1/8" mild steel plate Grant Erwin Metalworking 15 July 22nd 05 03:59 PM
Turning large cones to center a tube for cutting Terry Clark Woodturning 10 March 14th 04 09:51 PM
Jig for Cutting circles on a bandsaw Jim McLaughlin Woodworking 5 November 21st 03 08:45 PM
cutting circles on a bandsaw Larry Levinson Woodworking 8 November 5th 03 02:17 AM
Cutting trim for large bathroom mirror ... Need advice Al Kondo Home Repair 2 October 23rd 03 11:28 PM


All times are GMT +1. The time now is 11:51 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.SEO by vBSEO ©2010, Crawlability, Inc.
Copyright 2004-2014 DIYbanter.
The comments are property of their posters.