Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
Is there such a thing as a 2-gang 2-way switch that has a neon light
indicator for one of the switch rockers? The light up in the loft currently gets its feed from the switched live of the landing light so I have to have the landing light switched on to have the loft light on. I want to be able to switch the loft light on and off from the landing switch position but can forsee that someone may leave it on or switch it accidentally, hence the reason for wanting a neon indicator. John. |
#2
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
On Wed, 18 Oct 2006 21:35:16 UTC, "John" wrote:
Is there such a thing as a 2-gang 2-way switch that has a neon light indicator for one of the switch rockers? The light up in the loft currently gets its feed from the switched live of the landing light so I have to have the landing light switched on to have the loft light on. I want to be able to switch the loft light on and off from the landing switch position but can forsee that someone may leave it on or switch it accidentally, hence the reason for wanting a neon indicator. The MK Grid Plus range seem to have a 2 gang (single plate) module plate. You can get switches for that which have neons, and switches that don't have neons. A larger solution would be a slightly-bigger-than-double surface box that takes two single switches. I just fitted one today (MK again). One switch in each, and just make one a neon. Grid Plus is neater and probably cheaper. -- The information contained in this post is copyright the poster, and specifically may not be published in, or used by Avenue Supplies, http://avenuesupplies.co.uk |
#3
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
"Bob Eager" wrote in message ... On Wed, 18 Oct 2006 21:35:16 UTC, "John" wrote: Is there such a thing as a 2-gang 2-way switch that has a neon light indicator for one of the switch rockers? The light up in the loft currently gets its feed from the switched live of the landing light so I have to have the landing light switched on to have the loft light on. I want to be able to switch the loft light on and off from the landing switch position but can forsee that someone may leave it on or switch it accidentally, hence the reason for wanting a neon indicator. The MK Grid Plus range seem to have a 2 gang (single plate) module plate. You can get switches for that which have neons, and switches that don't have neons. A larger solution would be a slightly-bigger-than-double surface box that takes two single switches. I just fitted one today (MK again). One switch in each, and just make one a neon. Grid Plus is neater and probably cheaper. -- Thanks Bob, I'll look into that. John. |
#4
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
In article ,
"Bob Eager" writes: On Wed, 18 Oct 2006 21:35:16 UTC, "John" wrote: Is there such a thing as a 2-gang 2-way switch that has a neon light indicator for one of the switch rockers? The light up in the loft currently gets its feed from the switched live of the landing light so I have to have the landing light switched on to have the loft light on. I want to be able to switch the loft light on and off from the landing switch position but can forsee that someone may leave it on or switch it accidentally, hence the reason for wanting a neon indicator. The MK Grid Plus range seem to have a 2 gang (single plate) module plate. You can get switches for that which have neons, and switches that don't have neons. I don't recall any switches with neons in the range, but you can get a switch and separate neon module. -- Andrew Gabriel |
#6
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
The message
from "John" contains these words: The light up in the loft currently gets its feed from the switched live of the landing light so I have to have the landing light switched on to have the loft light on. I want to be able to switch the loft light on and off from the landing switch position but can forsee that someone may leave it on or switch it accidentally, hence the reason for wanting a neon indicator. Wouldn't it be easier just to mount the switch either by the hatch so you can see it but not knock it, or inside the loft so you can't forget it? -- Skipweasel Pay no attention to that man behind the curtain. |
#7
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
John wrote:
Is there such a thing as a 2-gang 2-way switch that has a neon light indicator for one of the switch rockers? The light up in the loft currently gets its feed from the switched live of the landing light so I have to have the landing light switched on to have the loft light on. I want to be able to switch the loft light on and off from the landing switch position but can forsee that someone may leave it on or switch it accidentally, hence the reason for wanting a neon indicator. I think so...but you may need a single gang rather than trying for a double.. John. |
#8
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
In article ,
John wrote: Is there such a thing as a 2-gang 2-way switch that has a neon light indicator for one of the switch rockers? No - but it would be easy to fit one. Maplin etc sell them. Round ones, so only a simple hole needed. Or even a mains LED indicator for posh. You do, however, need a neutral. -- *In "Casablanca", Humphrey Bogart never said "Play it again, Sam" * Dave Plowman London SW To e-mail, change noise into sound. |
#9
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
On 18 Oct 2006 21:43:54 GMT someone who may be "Bob Eager"
wrote this:- The MK Grid Plus range seem to have a 2 gang (single plate) module plate. You can get switches for that which have neons, and switches that don't have neons. Very useful they are too. I have a four way module in the kitchen. One way has a two way switch, which switches the main outside light (this also be switched from the shed), the next way has a neon light module which indicates when the main light is on. The other two ways have single way switches that operate other outside lights (which can only ever be on if the main light is on). A great way to assemble useful switching. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
#10
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
On Thu, 19 Oct 2006 07:05:19 UTC, David Hansen
wrote: On 18 Oct 2006 21:43:54 GMT someone who may be "Bob Eager" wrote this:- The MK Grid Plus range seem to have a 2 gang (single plate) module plate. You can get switches for that which have neons, and switches that don't have neons. Very useful they are too. I have a four way module in the kitchen. One way has a two way switch, which switches the main outside light (this also be switched from the shed), the next way has a neon light module which indicates when the main light is on. The other two ways have single way switches that operate other outside lights (which can only ever be on if the main light is on). A great way to assemble useful switching. I've just found a useful application for the 2 x single plate combined back box. One has the DP switch to isolate the central heating, and the other (with a blanking plate) contains the cross connections that were nastily squashed into the single switch box previously (flexible to the boiler jammed in alongside the other load connections). -- The information contained in this post is copyright the poster, and specifically may not be published in, or used by Avenue Supplies, http://avenuesupplies.co.uk |
#11
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
. You do, however, need a neutral. Two ways to get away without a neutral. The naughty way is to to connect to earth instead, assuming that the lights aren't RCD. The nice way is to use a two way switch and put the neon between L1 and L2. When the lamp is on - one side of the neon is unconnected so it is off. When the lamp is off the neon is in series with the lamp which is low enough resistance to neutral. |
#12
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
In article . com,
dcbwhaley wrote: . You do, however, need a neutral. Two ways to get away without a neutral. The naughty way is to to connect to earth instead, assuming that the lights aren't RCD. The current is so low it won't trip an RCD. The nice way is to use a two way switch and put the neon between L1 and L2. When the lamp is on - one side of the neon is unconnected so it is off. When the lamp is off the neon is in series with the lamp which is low enough resistance to neutral. Or just wire it across a one way switch - the result will be the same. But most want the warning neon to be on with the light. -- *Lottery: A tax on people who are bad at math. Dave Plowman London SW To e-mail, change noise into sound. |
#13
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
On Thu, 19 Oct 2006 09:05:15 UTC, "dcbwhaley" wrote:
. You do, however, need a neutral. Two ways to get away without a neutral. The naughty way is to to connect to earth instead, assuming that the lights aren't RCD. The nice way is to use a two way switch and put the neon between L1 and L2. When the lamp is on - one side of the neon is unconnected so it is off. When the lamp is off the neon is in series with the lamp which is low enough resistance to neutral. And one could use a standard two gang switch then, with one of those neon 'sandwich' switch plates... -- The information contained in this post is copyright the poster, and specifically may not be published in, or used by Avenue Supplies, http://avenuesupplies.co.uk |
#14
Posted to uk.d-i-y
|
|||
|
|||
2-gang 2-way switch
"Bob Eager" wrote in message ... On Thu, 19 Oct 2006 09:05:15 UTC, "dcbwhaley" wrote: . You do, however, need a neutral. Two ways to get away without a neutral. The naughty way is to to connect to earth instead, assuming that the lights aren't RCD. The nice way is to use a two way switch and put the neon between L1 and L2. When the lamp is on - one side of the neon is unconnected so it is off. When the lamp is off the neon is in series with the lamp which is low enough resistance to neutral. And one could use a standard two gang switch then, with one of those neon 'sandwich' switch plates... Thanks very much to everyone who replied - I've learned a lot from your answers ) John. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Light switch problem | Home Repair | |||
Anyone, Advice please - another electrical light switch puzzle thing | Home Repair | |||
Correcting a "misbehaving" 3-way switch | Home Ownership | |||
Advice on wiring a 2 gang 1 way switch | UK diy | |||
help selecting a manual transfer switch | Home Repair |