Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
table lamp screw fitting
I've just tried to repair a broken table lamp and the replacement
fitting I bought didn't screw onto the base of the lamp as it was a different size. This is a new lamp, I thought they were all one standard size. Anyone know what's going on? |
#2
|
|||
|
|||
table lamp screw fitting
Ben wrote in message ... I've just tried to repair a broken table lamp and the replacement fitting I bought didn't screw onto the base of the lamp as it was a different size. This is a new lamp, I thought they were all one standard size. Anyone know what's going on? I the good old days they were all threaded 1/2" British Standard Brass thread (26tpi) but all sorts of threads turn up these days on 'furrin' lamps. Bob |
#3
|
|||
|
|||
table lamp screw fitting
On Sat, 15 Oct 2005 19:40:46 +0100, Ben scrawled:
I've just tried to repair a broken table lamp and the replacement fitting I bought didn't screw onto the base of the lamp as it was a different size. This is a new lamp, I thought they were all one standard size. Anyone know what's going on? I'd hazard a guess at you've got the wrong size fitting. -- Stuart @ SJW Electrical Please Reply to group |
#4
|
|||
|
|||
table lamp screw fitting
"Ben" wrote in message ... I've just tried to repair a broken table lamp and the replacement fitting I bought didn't screw onto the base of the lamp as it was a different size. This is a new lamp, I thought they were all one standard size. Anyone know what's going on? Looks like you've bought the good old fashioned 1/2 Inch size. try getting a 10mm one. the 1/2 inch and 10mm ones are most common types u can get. -=Scozia=- |
#5
|
|||
|
|||
table lamp screw fitting
-=Scozia=- wrote:
"Ben" wrote in message ... I've just tried to repair a broken table lamp and the replacement fitting I bought didn't screw onto the base of the lamp as it was a different size. This is a new lamp, I thought they were all one standard size. Anyone know what's going on? Looks like you've bought the good old fashioned 1/2 Inch size. try getting a 10mm one. the 1/2 inch and 10mm ones are most common types u can get. -=Scozia=- Yeah, I've measured them and you're right. The broken one from the new lamp is 10mm and the replacement one they had in the local DIY shop is the old 1/2 inch. Looks like I'll be going to B&Q tomorrow then. Thanks |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
An Ultimate Router Table - Part I: A Short Story | Woodworking | |||
Table saw reviews?? | Woodworking | |||
Design of Regular Decagon Table | Woodworking | |||
Router Table Top Questions | Woodworking | |||
Adjustable Shop/Die Table | Metalworking |