Flue Regulations - Distances required
On new wall mounted boilers for domestic properties, is there a minimum dimension required the flue has to be away above a door or window?
The manufacturers always list the dimensions to the side or below but never above? Does anyone know if there is a standard figure or not. thanks |
On Wed, 20 Apr 2005 20:26:03 +0100, pauliepie wrote:
On new wall mounted boilers for domestic properties, is there a minimum dimension required the flue has to be away above a door or window? The manufacturers always list the dimensions to the side or below but never above? Does anyone know if there is a standard figure or not. thanks The installation instructions will invariably contain this information. In general they will be in line with BS 5440 and that will depend on the the type of the flue (probably fan assisted and room sealed) and the power of the boiler. Since the the area above a window or door is a lintel you won't want to be knocking a hole through it. Therefore the usual 300mm minimum for fanned boiler flues is reasonable. -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at http://www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html |
All times are GMT +1. The time now is 04:22 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter