Does anybody know, that according to some Oil Geologists (e.g. Colin Campbell) in 2013 the world oil output is going to peak ? Are you aware what...

Doing a fencing job at the mo, and its being a right embuggerance. Posts are rotten at ground level & seem to be embedded in a mixture of hardcore...

The hot weather of the last few days has softened slightly the recently laid tarmac surface and there are now 3 new bumpd where weeds are sprouting...

Hi, Got 8 bags of Cempolatex that's going down in a couple of weeks. Will be using a series of guide rails to ensure correct levels and laying...

Hi, Just buying the fittings for the F&E tank for a 250l DIY heatbank. Any reason to take 22mm for the fill and vent/expansion connections? Most...

Looking for some 6mm diameter steel shafting. Primary requirement is stiffness. Is stainless better than silver steel? Also looking for metal tube...

Any help with this would be appreciated. Chris

On Jun 3, 4:07*pm, The Natural Philosopher wrote: Robb wrote: Mrs Mike Reid wrote: "The Natural Philosopher"...

I'm refitting my bathroom, and am currently doing the tiling. I have bought some of that 'quadrant' edging strip that has a wide straight edge to go...

The hedge that we have at the edge of our garden is a bit bare at the bottom, though it reasonably think from around 8-10 inches off the ground...

As subject line really. Vistec do a window coating that is the next-best-thing to true self-cleaning glass, ie, Pilkington Activ - or so they...

Hello, I just wondered how did you get on with the Aldi hoist? I see my store has a couple left and I am still wondering about getting one to...

"Love Europe, Hate the EU" wrote: The British media was bought up by rich men with funny names a long time ago. Just try to stop immigration...

Hello, Is there a group better suited to electronic queries, preferably a UK based one? I haven't dabbled with building my own circuits for a few...

Just been on holiday and took a "spare" charger base. When I came to use it the toothbrush wouldn't fit due to slight alterations (Damn you Braun -...

I want to put a drop front on a keyboard drawer so that the front will look like the first item below (as seen from the side) when in the raised...

I have a captain's chair (I think that's what it's called?)... http://img198.imageshack.us/img198/8233/chair.jpg ....which as you can see has a strut...

Hello I need to grind down a piece of steel about 60cm x 6mm which is slightly proud of a floor I want to tile over. It only needs to go down 1 or...

Hello, Whenever we turned on our cold water taps, the pipes made a knocking noise, so I fitted a PRV and reduced the mains from 4 bar down to 3 bar...

Hi all. I found a 66 piece router set on www.toolman.co.uk The set has a VERY GOOD range of cutters. with 3 beading variations, and 15, 22.5, 30, 45...