Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Eric Fretheim
 
Posts: n/a
Default Metal spinning tools

I'm an amateur woodturner looking into hand metal spinning as
an extension to my craft. I've pretty much established that my
Jet can do the fairly small items I'm considering, once I've
purchase a modified toolrest, but acquiring tools is another
subject. The only manufactured spinning tools available for a
home craftsman that I can locate are a limited selection of
tools produced by Sorby. Can anyone point me to a custom
toolmaker familiar with hand spinning tools, or should I just
go to my local machinist and hope for the best?
--
Regards,
Eric Fretheim
  #2   Report Post  
Eric Fretheim
 
Posts: n/a
Default

Beautiful! That's just the sort of thing I've been looking
for. Should have thought of Yahoo. Thanks.
--
Regards,
Eric Fretheim

David Billington wrote:
If you haven't already found it join
http://finance.groups.yahoo.com/group/metalspinning/ if you don't mind
yahoo group. Look through the archives and ask. There has been some
recent info on tools and the archives have quite a bit.

Eric Fretheim wrote:

I'm an amateur woodturner looking into hand metal spinning as an
extension to my craft. I've pretty much established that my Jet can
do the fairly small items I'm considering, once I've purchase a
modified toolrest, but acquiring tools is another subject. The only
manufactured spinning tools available for a home craftsman that I can
locate are a limited selection of tools produced by Sorby. Can anyone
point me to a custom toolmaker familiar with hand spinning tools, or
should I just go to my local machinist and hope for the best?
--
Regards,
Eric Fretheim




  #3   Report Post  
David Billington
 
Posts: n/a
Default

If you haven't already found it join
http://finance.groups.yahoo.com/group/metalspinning/ if you don't mind
yahoo group. Look through the archives and ask. There has been some
recent info on tools and the archives have quite a bit.

Eric Fretheim wrote:

I'm an amateur woodturner looking into hand metal spinning as an
extension to my craft. I've pretty much established that my Jet can
do the fairly small items I'm considering, once I've purchase a
modified toolrest, but acquiring tools is another subject. The only
manufactured spinning tools available for a home craftsman that I can
locate are a limited selection of tools produced by Sorby. Can anyone
point me to a custom toolmaker familiar with hand spinning tools, or
should I just go to my local machinist and hope for the best?
--
Regards,
Eric Fretheim



  #4   Report Post  
Ken Grunke
 
Posts: n/a
Default

Eric Fretheim wrote:
I'm an amateur woodturner looking into hand metal spinning as an
extension to my craft. I've pretty much established that my Jet can do
the fairly small items I'm considering, once I've purchase a modified
toolrest, but acquiring tools is another subject. The only manufactured
spinning tools available for a home craftsman that I can locate are a
limited selection of tools produced by Sorby. Can anyone point me to a
custom toolmaker familiar with hand spinning tools, or should I just go
to my local machinist and hope for the best?
--
Regards,
Eric Fretheim


I haven't done spinning, but have looked into doing it. In fact, my wood
lathe is converted from what was originally a metalspinning lathe--a
Spinmaster:

http://www.token.crwoodturner.com/shop/

The tools I've seen in textbooks are just steel shafts, with hardened
tips ground and polished to various shapes.

Buy a 36" length of 1/2" oil-hardening tool steel, cut into 3 pieces,
and make your own tools with long wooden handles.

I *am* a custom toolmaker, by the way.

Ken Grunke
La Farge, WI USA

--
take da "ma" offa dot com fer eemayl

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
  #5   Report Post  
Eric Fretheim
 
Posts: n/a
Default

Thanks for the advice. I'll keep your URL on tap in case I run
into trouble...
I checked your gallery out. Very nice work!
----
Eric Fretheim


Ken Grunke wrote:
Eric Fretheim wrote:

I'm an amateur woodturner looking into hand metal spinning as an
extension to my craft. I've pretty much established that my Jet can
do the fairly small items I'm considering, once I've purchase a
modified toolrest, but acquiring tools is another subject. The only
manufactured spinning tools available for a home craftsman that I can
locate are a limited selection of tools produced by Sorby. Can anyone
point me to a custom toolmaker familiar with hand spinning tools, or
should I just go to my local machinist and hope for the best?
--
Regards,
Eric Fretheim



I haven't done spinning, but have looked into doing it. In fact, my wood
lathe is converted from what was originally a metalspinning lathe--a
Spinmaster:

http://www.token.crwoodturner.com/shop/

The tools I've seen in textbooks are just steel shafts, with hardened
tips ground and polished to various shapes.

Buy a 36" length of 1/2" oil-hardening tool steel, cut into 3 pieces,
and make your own tools with long wooden handles.

I *am* a custom toolmaker, by the way.

Ken Grunke
La Farge, WI USA



  #6   Report Post  
Gerald Miller
 
Posts: n/a
Default

On Fri, 11 Feb 2005 17:44:47 -0600, Eric Fretheim
wrote:

I'm an amateur woodturner looking into hand metal spinning as
an extension to my craft. I've pretty much established that my
Jet can do the fairly small items I'm considering, once I've
purchase a modified toolrest, but acquiring tools is another
subject. The only manufactured spinning tools available for a
home craftsman that I can locate are a limited selection of
tools produced by Sorby. Can anyone point me to a custom
toolmaker familiar with hand spinning tools, or should I just
go to my local machinist and hope for the best?

I made a basic forming tool by cutting a rod on an angle and grinding
it to resemble the back of a teaspoon then polished it smooth. Another
possibility is to mount a small ball bearing race in a split in the
end of a rod. In both cases, the rod needs to be long and stiff enough
to provide leverage to generate the required forces.
Gerry :-)}
London, Canada
  #7   Report Post  
R. O'Brian
 
Posts: n/a
Default

See http://www.jamesriser.com/Machinery/...olForging.html



"Eric Fretheim" wrote in message
...
I'm an amateur woodturner looking into hand metal spinning as
an extension to my craft. I've pretty much established that my
Jet can do the fairly small items I'm considering, once I've
purchase a modified toolrest, but acquiring tools is another
subject. The only manufactured spinning tools available for a
home craftsman that I can locate are a limited selection of
tools produced by Sorby. Can anyone point me to a custom
toolmaker familiar with hand spinning tools, or should I just
go to my local machinist and hope for the best?
--
Regards,
Eric Fretheim



  #8   Report Post  
Terry
 
Posts: n/a
Default

www.metalspinningworkshop.com The Metal spinning workshop DVD will be
released in April 2005. 120 minutes

New metal spinning DVD due for release


This innovative DVD is the first ever-visual tutorial produced on the
age old craft of Metal Spinning. Get one on one metal spinning lesson,
tips, tricks & spinning secrets from Terry Tynan, a life long
professional Metal spinner from the comfort of your own workshop or
home. The DVD contains six chapters.

Chapter 1
Making your own metal spinning tools
Chapter 2
Beading, trimming, truing up
Chapter 3
Converting a wood turning lathe into a metal spinning lathe
Chapter 4
Posture
Chapter 5
Speed, control, pressure
Chapter 6
Metal spinning tutorials
This chapter covers the four basic shapes in metal spinning, the
dome/hemisphere, cylinder, cone, and flute

Go to www.metalspinningworkshop.com to view the full details.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FAQ: HAND TOOLS (Repost) Groggy Woodworking 0 January 16th 05 11:56 AM
rec.woodworking ANTI-FAQ Part 2 of 10 - Tools Luigi Zanasi Woodworking 4 April 3rd 04 09:09 AM
Draft review of P&N tools Lyn J. Mangiameli Woodturning 2 March 31st 04 01:13 AM
Power tools in Europe (long) Christian Aufreiter Woodworking 23 October 17th 03 11:44 AM


All times are GMT +1. The time now is 09:54 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"