Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Sandblaster construction
Hello,
I want to construct a sandblaster. I am aware of the requiremetns of compressor pressure and flow rate, and also of the type of blasting media. I know also the principle of operation and would like to go for a pressurised system (not a suction-from-the-buck one -- if really that works). Is there any site where I could get precise directions or drawings on how to build that machine? Thanks and regards. Jesus delete-jbenajes.at.mot.upv.es-delete |
#2
|
|||
|
|||
"Usuario Invitado" wrote in message ... Hello, I want to construct a sandblaster. I am aware of the requiremetns of compressor pressure and flow rate, and also of the type of blasting media. I know also the principle of operation and would like to go for a pressurised system (not a suction-from-the-buck one -- if really that works). Is there any site where I could get precise directions or drawings on how to build that machine? Thanks and regards. Jesus delete-jbenajes.at.mot.upv.es-delete you can get a pressure pot from harbor freight for not very much. why do you want to build one? |
#3
|
|||
|
|||
"Charles Spitzer" wrote in message ... "Usuario Invitado" wrote in message ... Hello, I want to construct a sandblaster. I am aware of the requiremetns of compressor pressure and flow rate, and also of the type of blasting media. I know also the principle of operation and would like to go for a pressurised system (not a suction-from-the-buck one -- if really that works). Is there any site where I could get precise directions or drawings on how to build that machine? Thanks and regards. Jesus delete-jbenajes.at.mot.upv.es-delete you can get a pressure pot from harbor freight for not very much. why do you want to build one? Its a royal POS! Don't waste your money. I bought one when they were on sale for like $75. One of the worst wastes of money I've ever spent. I threw it away and bought one from TP Tools. Lane |
#4
|
|||
|
|||
Would you care to define royal POS?
What was wrong with it? It looks from first glance as something that one could build on. Bear in mind I have not used their kit so I am interested in your opinion. Thanks TMT |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Windsor Plywood Scam - Saskatoon | Woodworking | |||
Construction Loan | Home Ownership | |||
Locating septic leach lines for construction? | Home Repair | |||
Appraisal, refinance, and "under construction" question | Home Ownership | |||
Single Wall Construction Extension - Problems?? | UK diy |