Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Harrison 9" and Harrison 140 change gears
replying to doodibloo, bill wrote:
according to the manual the 140 and L5 gearsets are same fitting however the manual states that L5 gears are all whole numbers apart from a 45 and 65... the full L5 set is dependent on which actual gear is fitted for threading and whether it's imperial or metric, if it's only 3 position imperial the gears are 20,40,50,55,60,65,70,80,100,120 with 2 of 60..... .adding the 127 gives metric threads... hope that helps -- for full context, visit http://www.polytechforum.com/metalwo...ars-19873-.htm |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
I need to find a 63 tooth change wheel for my harrison 140 lathe | Metalworking | |||
Harrison-M300#1 Help & information please. - Harrison-M300#1.JPG (1/1) Sorry all - More info inside. | Metalworking | |||
Harrison-M300#1 Help & information please. - Harrison-M300#1.JPG (0/1) | Metalworking | |||
schematic diagram Harrison "K-4000" (K4000) MK-II 2x1000W wanted | Electronics Repair | |||
schematic diagram Harrison "K-4000" (K4000) MK-II 2x1000W wanted | Electronics Repair |