Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
IMPACT GUN BRAND NEW LOOSING AIR FROM EXAUST
I just bought a new kit from Canadian Tire this kit.. http://www.canadiantire.ca/fr/pdp/ma...9369p.html#srp
All the tools works great but the impact gun is loosing air from the exaust when I don't use it is this normal I don't think so.. The vendor told me it was.. If I loose air I loose power so it shouldn't be right. I need an answer please.. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
IMPACT GUN BRAND NEW LOOSING AIR FROM EXAUST
On Sun, 20 Nov 2016 14:27:18 -0800 (PST), wrote:
I just bought a new kit from Canadian Tire this kit.. http://www.canadiantire.ca/fr/pdp/ma...9369p.html#srp All the tools works great but the impact gun is loosing air from the exaust when I don't use it is this normal I don't think so.. The vendor told me it was.. If I loose air I loose power so it shouldn't be right. I need an answer please.. The air SHOULD shut off completely with the trigger released but some do let a bit of air past.. All of that air goes through the air motor so you will still get full power (however much it actually pruduces - I say 420 ft lbs is blowing smoke). After a few years all of mine (2 of them were professional CP 734 units) passed some air while idle. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Plumbing Code - Can I tie my bathroom exaust fan into the main plumbing vent to the outside. | Home Repair | |||
Extension cable loosing flexibility | Home Repair | |||
Outlets Progressively Loosing Power? | Home Repair | |||
Capacity of exaust fan | Metalworking | |||
Ebay Router Follow-Up (new X-brand or used Name Brand) | Woodworking |