Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,473
Default OT - filling a tire with foam.

I have this small tube-type tire on a wagon. It went flat. I took the
tube out & checked it under water - no leaks. I put a new stem in & put
the tire back on the wagon. It went flat!

I gave up & tried something that I saw on YouTube - foam. I drilled
some holes in a sidewall and squirted in some Great Stuff. I left it to
harden and came back to this:

http://imgur.com/a/YcGpa

Not a problem, but definitely amusing.

Bob
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 311
Default OT - filling a tire with foam.

On 09/10/16 22:46, Bob Engelhardt wrote:
I have this small tube-type tire on a wagon. It went flat. I took
the tube out & checked it under water - no leaks. I put a new stem in
& put the tire back on the wagon. It went flat!

I gave up & tried something that I saw on YouTube - foam. I drilled
some holes in a sidewall and squirted in some Great Stuff. I left it
to harden and came back to this:

http://imgur.com/a/YcGpa

Not a problem, but definitely amusing.

Bob

So are you going to use it or exhibit it at the Tate Modern. I've not
used Great Stuff but have heard mention of it, is it a resilient foam
with some give in it or is it a hard foam.
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 10,399
Default OT - filling a tire with foam.

On Sun, 09 Oct 2016 17:46:29 -0400, Bob Engelhardt
wrote:

I have this small tube-type tire on a wagon. It went flat. I took the
tube out & checked it under water - no leaks. I put a new stem in & put
the tire back on the wagon. It went flat!

I gave up & tried something that I saw on YouTube - foam. I drilled
some holes in a sidewall and squirted in some Great Stuff. I left it to
harden and came back to this:

http://imgur.com/a/YcGpa

Not a problem, but definitely amusing.

Bob


Didnt drop a decimal point when calculating volume did we?

(Grin)

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 9,025
Default OT - filling a tire with foam.

On Sun, 09 Oct 2016 15:29:20 -0700, Gunner Asch
wrote:

On Sun, 09 Oct 2016 17:46:29 -0400, Bob Engelhardt
wrote:

I have this small tube-type tire on a wagon. It went flat. I took the
tube out & checked it under water - no leaks. I put a new stem in & put
the tire back on the wagon. It went flat!

I gave up & tried something that I saw on YouTube - foam. I drilled
some holes in a sidewall and squirted in some Great Stuff. I left it to
harden and came back to this:

http://imgur.com/a/YcGpa

Not a problem, but definitely amusing.

Bob


Bob, next time, remove the tire and find the culprit which caused your
flat in the first place, and clean out the tire. Then dust it and the
tube with talc and reinstall 'em. Make sure the valve is centered in
the hole when you air it up. Check that the core is seated, too. I've
had several tubes with loose valve cores direct from the factory.
(2 Chi, 1 Amer) I've had great luck with Green Slime, but when the
punctures are in the sidewall or around the valve stem, it's time for
a new tube. Blackberry thorns harass me up here.

The GreatStuff is semi-resilient, but you'll find that it will flatten
if you put very much weight on it, especially over time. It doesn't
rebound from that well. A wheelbarrow, left loaded overnight, will
have an irreparable flat in the morning.


Didnt drop a decimal point when calculating volume did we?

(Grin)


Perhaps he forgot that it expands? And how do you "calculate volume"
from a spray can of foam, duuuude?

--
If government were a product,
selling it would be illegal.
--P.J. O'Rourke
  #5   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 38
Default OT - filling a tire with foam.

--Adding foam to tires is a thing that tractor shops sometimes do. Be aware the **** is heavy but it cures to something rubbery that won't crush under load, as will that stuff you used. Plan B: as Larry suggested clean it all out and look for slivers on the inside, rather than outside of the tire.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Old Coats Tire Man manual tire changer oldjag Metalworking 19 November 29th 19 12:18 AM
Filling a tire with "Great Stuff" expandable foam [email protected] Home Repair 31 February 21st 18 11:27 PM
Weird radiator filling - or rather non-filling Zaphod2 UK diy 7 July 13th 12 04:59 PM
Foam - 2 pound blue foam on Holmes on Homes george [dicegeorge] UK diy 10 December 28th 09 07:26 PM
Alternative to spray foam for filling gaps? Patrick Maloney Home Repair 6 November 25th 08 05:16 AM


All times are GMT +1. The time now is 12:54 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"