Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Strange thread
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Strange thread
"Lloyd E. Sponenburgh" lloydspinsidemindspring.com fired this volley
in . 4.170: Path: buffer1.nntp.dca1.giganews.com!local2.nntp.dca.gig anews.com!nntp.earthl ink.com!news.earthlink.com.POSTED!not-for-mail NNTP-Posting-Date: Wed, 15 Jul 2015 18:14:32 -0500 Newsgroups: rec.crafts.metalworking Subject: Strange thread From: "Lloyd E. Sponenburgh" lloydspinsidemindspring.com References: Organization: Automation Machine Design, LLC. Message-ID: 0 User-Agent: Xnews/5.04.25 Date: Wed, 15 Jul 2015 18:14:32 -0500 Lines: 12 X-Usenet-Provider: http://www.giganews.com NNTP-Posting-Host: 184.170.81.7 X-Trace: sv3-p9TVtsHtAyE6FXXxJB9JOdhQOP/6lZWIACa9ezBr65IBDgFcUjMeetyYtvnotAxTFft UVDorhHm8DDY!YgNOp2NFnPj/YJUP8yuZgP4DmRffNAW0MZrqdJJVX5cE2MV5jN/c6ToBqD /M6szGtlsbZSAcFhrV!9nMerX6DiAPHqC9FIEy0Y8J1mN4yJ0Ai QXNO/A== X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly X-Postfilter: 1.3.40 Bytes: 1353 Xref: number.nntp.giganews.com rec.crafts.metalworking:1535607 (Volker Borchert) fired this volley in news:mo6j31 : WTF is this? It's obviously neither M12(x1,75) nor UNC1/2x13... Is there an UNC15/32x13? Or even a cross-over 12mmx13TPI? How did you determine the threads per inch? 14mm x 2mm pitch is very close to 13tpi, and the tap drill size of 15/32 works well. Lloyd Sorry... your 'footnotes' didn't appear on my screen until after I'd posted and scrolled down further... duh! I dunno! Lloyd |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Strange thread | Metalworking | |||
If a thread takes months, is it better to stay on the same thread? | Home Repair | |||
Machine Thread to Wood Thread Dowel Screw | UK diy | |||
Another 4-start thread question - 1/4" internal thread | Metalworking | |||
Questions regarding thread diameter and pitch for special design case with limited thread length | Metalworking |