Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Crimp vs Swage
Not sure if you're still looking for links but I just bought from this
site and they had what I needed. If not, hope this helps the next guy. *http://www.usriggingdepot.com/swaging-tools/* -- posted from http://www.polytechforum.com/metalwo...ge-603229-.htm using PolytechForum's Web, RSS and Social Media Interface to rec.crafts.metalworking and other engineering groups |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Crimp vs Swage
On 9/26/2014 4:18 PM, John Stone wrote:
Not sure if you're still looking for links but I just bought from this site and they had what I needed. If not, hope this helps the next guy. *http://www.usriggingdepot.com/swaging-tools/* http://www.usriggingdepot.com/swaging-tools/ works. Nice info and supplies. Martin |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
to crimp or not to crimp ? | UK diy | |||
Crimp without crimp tool ? | UK diy | |||
Swage stops (aka buttons) | Home Repair | |||
Roger Degner on making hollow anvils and hollow swage blocks | Woodworking | |||
OT selling anvil and swage blocks | Metalworking |