 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
PING: Larry Jaques-following error video
Greetings Larry,
Over a year ago I asked if anyone was interested in seeing a short video that briefly explains in a limited fashion following error in an electronic servo system. Well, I have finally managed to get the video uploaded to youtube after many tries. A new app called "Capture" enabled me to do this upload. So I hope better late than never applies here. Cheers, Eric |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
PING: Larry Jaques-following error video
On 9/25/2014 12:11 PM, wrote:
Greetings Larry, Over a year ago I asked if anyone was interested in seeing a short video that briefly explains in a limited fashion following error in an electronic servo system. Well, I have finally managed to get the video uploaded to youtube after many tries. A new app called "Capture" enabled me to do this upload. So I hope better late than never applies here. Cheers, Eric https://www.youtube.com/watch?v=cHhVeLxi7kg |
|
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
|
PING: Larry Jaques-following error video
On Thu, 25 Sep 2014 13:01:48 -0400, Bob Engelhardt
wrote: On 9/25/2014 12:11 PM, wrote: Greetings Larry, Over a year ago I asked if anyone was interested in seeing a short video that briefly explains in a limited fashion following error in an electronic servo system. Well, I have finally managed to get the video uploaded to youtube after many tries. A new app called "Capture" enabled me to do this upload. So I hope better late than never applies here. Cheers, Eric https://www.youtube.com/watch?v=cHhVeLxi7kg Whoops! It would help if I put the link or the url in the message. Thanks Bob. Eric |
|
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
|
PING: Larry Jaques-following error video
On Thu, 25 Sep 2014 11:14:42 -0700, etpm wrote:
On Thu, 25 Sep 2014 13:01:48 -0400, Bob Engelhardt wrote: On 9/25/2014 12:11 PM, wrote: Greetings Larry, Over a year ago I asked if anyone was interested in seeing a short video that briefly explains in a limited fashion following error in an electronic servo system. Well, I have finally managed to get the video uploaded to youtube after many tries. A new app called "Capture" enabled me to do this upload. So I hope better late than never applies here. Cheers, Eric https://www.youtube.com/watch?v=cHhVeLxi7kg Whoops! It would help if I put the link or the url in the message. Thanks Bob. Eric Cool. I like the use of the differential to indicate following error -- that's a nifty trick. If you ever do it again, de-tune the servo so that it has a settling time of a quarter of a second or so, then spin the input shaft so people can see the indicator swaying around. Then tune it up so that it's responding like yours there. -- www.wescottdesign.com |
|
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
|
PING: Larry Jaques-following error video
On Thu, 25 Sep 2014 23:35:53 -0500, tim wrote:
On Thu, 25 Sep 2014 11:14:42 -0700, etpm wrote: On Thu, 25 Sep 2014 13:01:48 -0400, Bob Engelhardt wrote: On 9/25/2014 12:11 PM, wrote: Greetings Larry, Over a year ago I asked if anyone was interested in seeing a short video that briefly explains in a limited fashion following error in an electronic servo system. Well, I have finally managed to get the video uploaded to youtube after many tries. A new app called "Capture" enabled me to do this upload. So I hope better late than never applies here. Cheers, Eric https://www.youtube.com/watch?v=cHhVeLxi7kg Whoops! It would help if I put the link or the url in the message. Thanks Bob. Eric Cool. I like the use of the differential to indicate following error -- that's a nifty trick. If you ever do it again, de-tune the servo so that it has a settling time of a quarter of a second or so, then spin the input shaft so people can see the indicator swaying around. Then tune it up so that it's responding like yours there. That's a good idea Tim. I think I'll try it Eric |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ping - Larry Jaques | Woodworking | |||
| Ping: Larry Jaques - Re plate Joiner | Woodworking | |||
| Ping Larry Jaques | Woodworking | |||
| Ping-Larry Jaques Camping stove | Metalworking | |||
| What's Become of Larry Jaques? | Woodworking | |||
Linear Mode
