hey guys

I'm peddling this welder, a CV miller "spoolmate 200" welder with the
"spoolmatic 1" gun. did quite a bit of 'detailing' on it (like it
matters, me can only hope). I've been asking $800, but unsure if that's
way high, "way low" or "just about right" for an *asking* price...

*SURE* appreciate if you guys would tell me what sum -you'd- be asking
for this setup if you were the seller :-)

or maybe tell me 'about what they usually go for, generally', or
something...*any*thing you tell me would be more than I know now...

you can gaze upon the thing here in ALL its' glory:

http://machines.2x.nu/miller_spoolma...00_MIG_welder/
miller_spoolmatic_1_gun_and_spoolmate_200_Miller_M IG_welder

*thanks* guys

dave 'toolie'

Considering that it includes that spoolmatic gun, I think that $800 is
not unreasonable, but be ready to drop the price, as times are tough.

Yesterday I bought a Millermatic 251 with a bunch of welding wire,
solid and fluxcore, including a big spool of Monel, full owner gas
tank, mig gun, and also a Delta 17-700 3/4 HP drill press in like new
condition, all for $1,000. So it is hard to say how much I paid for
the Millermatic, as I bough it together with the drill press, maybe I
would say $850, but my point is that it is a buyer's market. I do
think that the guy who sold that stuff to me could have gotten more
elsewhere, but not outrageously more.

I would say that if not for $800, but for $600 you can sell it for
sure, but I would try selling it for $800 first.

This is all assuming it is 1 phase.

i

On 2009-10-05, dave wrote:
hey guys

I'm peddling this welder, a CV miller "spoolmate 200" welder with the
"spoolmatic 1" gun. did quite a bit of 'detailing' on it (like it
matters, me can only hope). I've been asking $800, but unsure if that's
way high, "way low" or "just about right" for an *asking* price...

*SURE* appreciate if you guys would tell me what sum -you'd- be asking
for this setup if you were the seller :-)

or maybe tell me 'about what they usually go for, generally', or
something...*any*thing you tell me would be more than I know now...

you can gaze upon the thing here in ALL its' glory:

http://machines.2x.nu/miller_spoolma...00_MIG_welder/
miller_spoolmatic_1_gun_and_spoolmate_200_Miller_M IG_welder

*thanks* guys

dave 'toolie'

On Mon, 05 Oct 2009 17:13:25 -0500, Ignoramus14280
wrote:

Considering that it includes that spoolmatic gun, I think that $800 is
not unreasonable, but be ready to drop the price, as times are tough.

Yesterday I bought a Millermatic 251 with a bunch of welding wire,
solid and fluxcore, including a big spool of Monel, full owner gas
tank, mig gun, and also a Delta 17-700 3/4 HP drill press in like new
condition, all for $1,000. So it is hard to say how much I paid for
the Millermatic, as I bough it together with the drill press, maybe I
would say $850, but my point is that it is a buyer's market. I do
think that the guy who sold that stuff to me could have gotten more
elsewhere, but not outrageously more.

I would say that if not for $800, but for $600 you can sell it for
sure, but I would try selling it for $800 first.

This is all assuming it is 1 phase.

I concur with Iggy on this.

Gunner who has a nice! Airco PhaseArc 350 (3ph 300 amp mig) for sale and
might take $800



i

On 2009-10-05, dave wrote:
hey guys

I'm peddling this welder, a CV miller "spoolmate 200" welder with the
"spoolmatic 1" gun. did quite a bit of 'detailing' on it (like it
matters, me can only hope). I've been asking $800, but unsure if that's
way high, "way low" or "just about right" for an *asking* price...

*SURE* appreciate if you guys would tell me what sum -you'd- be asking
for this setup if you were the seller :-)

or maybe tell me 'about what they usually go for, generally', or
something...*any*thing you tell me would be more than I know now...

you can gaze upon the thing here in ALL its' glory:

http://machines.2x.nu/miller_spoolma...00_MIG_welder/
miller_spoolmatic_1_gun_and_spoolmate_200_Miller_M IG_welder

*thanks* guys

dave 'toolie'




Political Correctness is a doctrine fostered by a delusional,
illogical liberal minority, and rabidly promoted by an
unscrupulous mainstream media, which holds forth the
proposition that it is entirely possible to pick up a turd by the clean end.

On Mon, 05 Oct 2009 17:43:02 -0400, the infamous dave
scrawled the following:

hey guys

I'm peddling this welder, a CV miller "spoolmate 200" welder with the
"spoolmatic 1" gun. did quite a bit of 'detailing' on it (like it
matters, me can only hope). I've been asking $800, but unsure if that's
way high, "way low" or "just about right" for an *asking* price...

*SURE* appreciate if you guys would tell me what sum -you'd- be asking
for this setup if you were the seller :-)

or maybe tell me 'about what they usually go for, generally', or
something...*any*thing you tell me would be more than I know now...

you can gaze upon the thing here in ALL its' glory:

http://machines.2x.nu/miller_spoolma...00_MIG_welder/
miller_spoolmatic_1_gun_and_spoolmate_200_Miller_ MIG_welder

*thanks* guys

Dave just bought a new digital camera, didn't he? bseg

--
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all
progress depends on the unreasonable man.
-- George Bernard Shaw

thank you iggy :-)

and thanks to you too gunner :-)

'preciate yer help :-)

Ignoramus14280 wrote:

This is all assuming it is 1 phase.

yup, that's what it are :-)



*thanks* guys

dave 'toolie'

Larry Jaques wrote:


Dave just bought a new digital camera, didn't he? bseg

well, no. but, admittedly, maybe "a few too many" photos, ay?

I do tend to overdo it at times...

On Tue, 06 Oct 2009 09:29:30 -0400, the infamous dave
scrawled the following:

Larry Jaques wrote:


Dave just bought a new digital camera, didn't he? bseg

well, no. but, admittedly, maybe "a few too many" photos, ay?

I do tend to overdo it at times...

Eighty seven for one welder? Yeah, maybe a couple too many.
g

--
Reading well is one of the great pleasures that solitude can afford you.
-- Harold Bloom, O Magazine, April 2003

On Oct 5, 4:43*pm, dave wrote:
hey guys

I'm peddling this welder, a CV miller "spoolmate 200" welder with the
"spoolmatic 1" gun. did quite a bit of 'detailing' on it (like it
matters, me can only hope). I've been asking $800, but unsure if that's
way high, "way low" or "just about right" for an *asking* price...

*SURE* appreciate if you guys would tell me what sum -you'd- be asking
for this setup if you were the seller :-)

or maybe tell me 'about what they usually go for, generally', or
something...*any*thing you tell me would be more than I know now...

you can gaze upon the thing here in ALL its' glory:

http://machines.2x.nu/miller_spoolma...miller_spoolma...
miller_spoolmatic_1_gun_and_spoolmate_200_Miller_M IG_welder

*thanks* guys

dave 'toolie'

I bet it would bring more money if you paint it LINCOLN RED. ;)

TMT

hi all

thanks to all you guys for your comments and tips.

the spooler setup sold today "for the asking" to a local guy/cash

(so, maybe 87 pix -weren't- 'too many' ;-)

but, then again, one never knows...

toolie.