Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
What is it -203
1122 is definitely NOT a surveyors tape.
My guess is that is for measuring the circumference of a round, vertical tank----the brass vernier can be dropped to hold its place while you walk around the tank... The tape is probably marked every 6 inches to which you can add another 6 inches measured to the nearest 1/16"-------??????? Jerry |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|