Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Hitch
 
Posts: n/a
Default FREE parts bin cabinets (near Seattle)

I let the garage sale bug bite me a little too hard and I wound up with a
couple of parts bins that I can't fit into my garage. They are FREE to the
first one who comes and gets them.

There are two: one cabinet is about 34 wide x 11 high x 11 deep, 18
drawers, the other is about 34 wide x 11 high x 17 deep, 24 drawers. Sure
they're a little hammered, but hell, they're FREE!

If you want them, send me a note at:



Thanks,

John Snow

P.S. Did I mention that they are FREE?
  #2   Report Post  
jerry Wass
 
Posts: n/a
Default FREE parts bin cabinets (near Seattle)

DO THEY HAVE BALLBEARING DRAWER SLIDES???

Hitch wrote:

I let the garage sale bug bite me a little too hard and I wound up with a
couple of parts bins that I can't fit into my garage. They are FREE to the
first one who comes and gets them.

There are two: one cabinet is about 34 wide x 11 high x 11 deep, 18
drawers, the other is about 34 wide x 11 high x 17 deep, 24 drawers. Sure
they're a little hammered, but hell, they're FREE!

If you want them, send me a note at:



Thanks,

John Snow

P.S. Did I mention that they are FREE?


  #3   Report Post  
Larry Jaques
 
Posts: n/a
Default FREE parts bin cabinets (near Seattle)

On Sat, 15 May 2004 19:23:09 -0500, jerry Wass
brought forth from the murky depths:

DO THEY HAVE BALLBEARING DRAWER SLIDES???


And a nice, pearl-finish cabinet with oiled teak fronts?


-----------------------------------------------------------------
When I die, I'm leaving my body to science fiction. --Steven Wright
----------------------------
http://diversify.com Comprehensive Website Development

  #4   Report Post  
Hitch
 
Posts: n/a
Default FREE parts bin cabinets (near Seattle)

Larry Jaques wrote in
:

On Sat, 15 May 2004 19:23:09 -0500, jerry Wass
brought forth from the murky depths:

DO THEY HAVE BALLBEARING DRAWER SLIDES???


And a nice, pearl-finish cabinet with oiled teak fronts?


-----------------------------------------------------------------
When I die, I'm leaving my body to science fiction. --Steven Wright
----------------------------
http://diversify.com Comprehensive Website Development


No, and, uh, uh, lemme check, uh, no.

But they're FREE!
  #5   Report Post  
Lane
 
Posts: n/a
Default FREE parts bin cabinets (near Seattle)


"Hitch" wrote in message
...
Larry Jaques wrote in
:

On Sat, 15 May 2004 19:23:09 -0500, jerry Wass
brought forth from the murky depths:

DO THEY HAVE BALLBEARING DRAWER SLIDES???


And a nice, pearl-finish cabinet with oiled teak fronts?


-----------------------------------------------------------------
When I die, I'm leaving my body to science fiction. --Steven Wright
----------------------------
http://diversify.com Comprehensive Website Development


No, and, uh, uh, lemme check, uh, no.

But they're FREE!



I emailed you for more info and directions but no response!

Lane




  #6   Report Post  
Hitch
 
Posts: n/a
Default FREE parts bin cabinets (near Seattle)

"Lane" lane_nospam@copperaccents_dot_com wrote in
:

lane_nospam@copperaccents_dot_com


Sent you a message. Didn't receive your previous email. Check again.

Thanks,

John Snow
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Strategies for dealing with stuff/supply/material collections? GTO69RA4 Metalworking 8 April 3rd 04 04:38 PM
cleaning parts after tumbling Ryan Metalworking 6 July 16th 03 08:10 PM


All times are GMT +1. The time now is 01:57 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"