Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
AL
 
Posts: n/a
Default homemade beader/bead-roller?

Hi Tony I made my own bead roller it has a 18" throat to do the floor
in my rod. I used plans published in American Rodder no.62 july 1994
hope this helps.If you like I may be able to scan & email the pages to
you direct AL.
  #2   Report Post  
Errol Groff
 
Posts: n/a
Default homemade beader/bead-roller?


How about scan and post to the dropbox. That way more than one person
can get the benefit of your scanning effort.

Just a suggestion, but I look forward to seeing them

Errol Groff

On 29 Feb 2004 00:35:42 -0800, (AL) wrote:

Hi Tony I made my own bead roller it has a 18" throat to do the floor
in my rod. I used plans published in American Rodder no.62 july 1994
hope this helps.If you like I may be able to scan & email the pages to
you direct AL.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ring roller question Roy Metalworking 1 February 17th 04 03:27 PM
Homemade ring roller Ronnie Lyons, Meridian, Idaho Metalworking 2 February 11th 04 10:49 PM
harbor freight bead roller james Metalworking 5 December 7th 03 08:44 PM
Tubing Roller Progress Report Errol Groff Metalworking 2 November 17th 03 06:20 PM
Scrap Roller Acquisition ATP Metalworking 0 July 26th 03 08:18 PM


All times are GMT +1. The time now is 02:14 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"