Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal surface preparation for painting
Does anyone know if paint thinner can be used instead of lacquer thinner for metal
surface preparation before painting? Does paint thinner leave any surface film? (Pain direction says use lacquer thinner) |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal surface preparation for painting
"Alex" wrote: Does anyone know if paint thinner can be used instead of lacquer thinner for metal surface preparation before painting? (clip) ^^^^^^^^^^^^^ If the metal is CLEAN, it should not need any solvent washing prior to painting I spray paint steel all the time without washing it. Most things that might interfere with paint adhesion, like wax or oil, would be removed by either paint or lacquer thinner. Silicones are hard to remove, and I'm not sure even lacquer thinner can do a good job. |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal surface preparation for painting
Leo Lichtman wrote: "Alex" wrote: Does anyone know if paint thinner can be used instead of lacquer thinner for metal surface preparation before painting? (clip) ^^^^^^^^^^^^^ If the metal is CLEAN, it should not need any solvent washing prior to painting I spray paint steel all the time without washing it. Most things that might interfere with paint adhesion, like wax or oil, would be removed by either paint or lacquer thinner. Silicones are hard to remove, and I'm not sure even lacquer thinner can do a good job. One of the tests done to determine if metal is clean is a water break test. You just put water on the surface and if it beads up, the surface is not clean. If it stays in one continuous sheet, the metal is clean. Dan |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Metal surface preparation for painting
On Sat, 25 Feb 2006 21:08:07 GMT, with neither quill nor qualm, "Leo
Lichtman" quickly quoth: "Alex" wrote: Does anyone know if paint thinner can be used instead of lacquer thinner for metal surface preparation before painting? (clip) ^^^^^^^^^^^^^ If the metal is CLEAN, it should not need any solvent washing prior to painting I spray paint steel all the time without washing it. Most things that might interfere with paint adhesion, like wax or oil, would be removed by either paint or lacquer thinner. Silicones are hard to remove, and I'm not sure even lacquer thinner can do a good job. Naphtha is one good remover of silicone and many other oily substances. - Woodworkers of the world, Repent! Repeat after me: "Forgive Me Father, For I Have Stained and Polyed." - http://diversify.com Comprehensive Website Design |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ground Rod For House ? | Home Repair | |||
Metal buildings and lightening sort of OT | Metalworking | |||
Metal Pole for Eagle Scout Project | Metalworking | |||
Earth Bondng | UK diy | |||
Electrolytic Cleaning | Metalworking |