Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Side panel latches - 1947 SA 200 Welder
I have a 1947 Lincoln SA200 welder with intact original sheet metal
including the side panels. I bought it many years ago from the original owner who still had the purchase paperwork! The welder was completely original including the decals, etc. My question is this: How were the side panels latched down? Each side panel has a hole in the lower corner on each side but nothing corresponds to the holes in the welder frame or anywhere else. Maybe somebody out there has a similarly old machine with original sheet metal who can tell me what he thinks the latches looked like. -- posted from http://www.polytechforum.com/metalwo...er-621786-.htm using PolytechForum's Web, RSS and Social Media Interface to rec.crafts.metalworking and other engineering groups |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Side panel latches - 1947 SA 200 Welder
This might give you a hint
http://www.ebay.com/itm/OEM-LINCOLN-...-/221863071572 "BFR" wrote in message oups.com... I have a 1947 Lincoln SA200 welder with intact original sheet metal including the side panels. I bought it many years ago from the original owner who still had the purchase paperwork! The welder was completely original including the decals, etc. My question is this: How were the side panels latched down? Each side panel has a hole in the lower corner on each side but nothing corresponds to the holes in the welder frame or anywhere else. Maybe somebody out there has a similarly old machine with original sheet metal who can tell me what he thinks the latches looked like. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing bath side panel | UK diy | |||
Dresser Side Panel Question | Woodworking | |||
Looking for bath side panel | UK diy | |||
Wooden bath side panel | UK diy | |||
Where to get small push-push panel latches? | Metalworking |