Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Anyone knows a name for a positioning holder?
I use a dial indicator kit that includes the indicator, one of these
arms, and a modified pair of vise grips that the arm screws into. Each "link" of the arm has a ball on on end and a socket on the other. A cable runs through the arm. When you adjust a lever on one end, a cam tightens the cable and secures the arm. I use it with the visegrip clamped on my toolholder and the indicator touching various points on the lathe headstock and chuck to measure runout. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone knows a name for a positioning holder? | Metalworking | |||
Anyone knows a name for a positioning holder? | Metalworking | |||
Anyone knows a name for a positioning holder? | Metalworking | |||
Boring out hardened MT2 EM holder? | Metalworking | |||
For Trade - Shaper Keyway/Slotter Tool Holder | Metalworking |