Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Using "A" shape crucibles.
What books have detailed instructions on how to use "A" shape crucibles
and info on how their use differs from bilge type crucibles? How do I know what tongs to use with an "A" shape crucible? Tongs I have seen for sale at BCS are listed only by the size of bilge crucible they hold. I also want to know the same for pouring shanks. Thank you for any help. |
#2
|
|||
|
|||
Has anyone had any experience with this? Could you please share?
|
#3
|
|||
|
|||
"himog" wrote in message oups.com... Has anyone had any experience with this? Could you please share? You're not being ignored, at least not by me. I've never used one, but I'm keenly interested in hearing anything anyone has to offer. Harold |
#4
|
|||
|
|||
On Thu, 9 Jun 2005 18:47:16 -0700, "Harold and Susan Vordos"
wrote: "himog" wrote in message roups.com... Has anyone had any experience with this? Could you please share? You're not being ignored, at least not by me. I've never used one, but I'm keenly interested in hearing anything anyone has to offer. Me too! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Parabolic shape for reflector | UK diy | |||
Shape for a pressure washer fan nozzle | Metalworking | |||
When to shape and when to route? | Woodworking | |||
Clean Cutting og Shape From 1/2" Plate? | Metalworking | |||
Identify logo - hysteresis shape? | Electronics Repair |