Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Mark
 
Posts: n/a
Default Harrison lathe parts sources?

A friend has a quite large Harrison, with probable need for either / or
cross slide screw / nut. Anyone know of parts sources?
thanks in advance / mark on Salt Spring Island BC
  #2   Report Post  
James P Crombie
 
Posts: n/a
Default Harrison lathe parts sources?

600 Group is the service people in Canada, Good luck with them, I have
always found them to be a pain in the ass to deal with.
http://www.600machinetools.com/

Mark wrote:
A friend has a quite large Harrison, with probable need for either / or
cross slide screw / nut. Anyone know of parts sources?
thanks in advance / mark on Salt Spring Island BC


--
--------------------------------------------------------------------------

James P Crombie

Summerside Machinist
Prince Edward Island Amateur Astronomer
Canada 3D Designer

E-mail
Astronomy webpage
http://www.jamescrombie.com
Rhinoceros 3D webpage http://www.jamescrombie.com/rhino/
Mirror Grinder page http://www.jamescrombie.com/pics/
--------------------------------------------------------------------------

  #3   Report Post  
Glenn Cramond
 
Posts: n/a
Default Harrison lathe parts sources?

Mark wrote:
A friend has a quite large Harrison, with probable need for either / or
cross slide screw / nut. Anyone know of parts sources?
thanks in advance / mark on Salt Spring Island BC



Drop a message on http://groups.yahoo.com/group/shop_tool_exchange/
you should get help.
Glenn
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone got any parts for an INCA planer/thicknesser? Dave UK diy 0 April 2nd 04 04:09 PM
Parts availability? Worcester boiler. [email protected] UK diy 4 February 17th 04 02:01 AM
Collet recommendations/experience for Harrison Lathe Dean Metalworking 3 July 12th 03 07:48 AM


All times are GMT +1. The time now is 12:26 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"